Page 1
RF 3D Glasses ZF2300 User’s Manual 3x Nose pieces Precaution: Do not disassemble or repair Do not leave in direct sunlight or in excessive heat areas Do not use the product while driving or operating machinery Gently clean the glasses with the included microfiber cloth...
Page 2
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARNINGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION. Warning Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised when viewing these images. Photosensitive Seizure Warning and Other Health Risks ...
Page 3
USB/mini USB cable. (The glasses can still be used while charging) 1. Normal Usage 1. 1 Connect emitter to Optoma Projector Connect the emitter to your projector’s “3D SYNC OUT” port using the supplied cable. (2.5mm jack / VESA 3-PIN mini DIN) NB: Ensure that your projector is connected to a compatible 3D source and that that the “3D Sync Out”...
Page 4
1.3. Be within the pairing zone When pairing the glasses for the first time, the glasses must be within pairing range zone. Once paired with the emitter, the glasses will function within the viewing range. If the glasses fail to sync with last paired emitter, the glasses can be paired again with the nearest emitter.
Page 5
2. The image still looks 2D. Ensure you are using: a. 3D blu-ray player with 3d function enabled. b. 3D blu-ray disc c. Optoma projector with 3d Vesa enabled and rf emitter connected to the projector. d. Glasses are on. 3. Glasses won’t stay synced.