Gxv3501/Gxv3504 Ftp; Gxv3501/Gxv3504 Ptz - Grandstream Networks GXV3501 User Manual

GXV3501/GXV3504 Digital Video Server
encrypted connection.
From E-Mail Address – The email address that sends out the alarm email(s).
To E-Mail Address – The email addresses that the alarm email(s) will be sent to. You can
have up to 3 emails configured.
This server requires a secure connection (SSL) – Set this field to Yes if the SMTP server
requires a secure connection.
User Name/ Password – The user name and password required to log in to your SMTP
server, for example, 123@gmail.com/123.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3501/GXV3504 FTP Page
The FTP server is used to store video files if you configure the GXV3501/GXV3504 to record
video and upload it to the FTP server when an alarm
event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is "No," if you want
the GXV3501/GXV3504 to upload the recorded video to
the FTP server when an alarm is triggered, set this field
to "Yes."
FTP Server – The IP address or hostname of the SMTP
server, ie. ftp.myserver.com.
Port – The port that your FTP server is using.
User Name / Password – The user name and password required to log into your FTP server
Path – The directory in the FTP server where recorded video will be uploaded.
Test FTP Account Settings – Click the Test button to upload a sample file to make sure that
FTP is properly configured.
GXV3501/GXV3504 PTZ Page
This page configures the PTZ settings. Select the
PTZ protocol that your connected equipment
supports by clicking on the radio in front of the
protocol. Next, select the Baudrate from the drop
down menu.
PTZ Configuration Items
Firmware 1.0.2.3 Page 24 of 34
Grandstream Networks, Inc. 11/2009