Gxv3501/Gxv3504 Maintenance; Gxv3501/Gxv3504 Administrator - Grandstream Networks GXV3501 User Manual

GXV3501/GXV3504 Maintenance Page
Server Maintenance
Restart – Click this button to restart the
GXV3501/GXV3504.
Restore – Click this button to perform a
partial factory reset (The IP address will
not be cleared) .
Firmware Upgrade and Provisioning Items
Upgrade via – This field lets you choose the
firmware upgrade method. The
GXV3501/GXV3504 supports HTTP, HTTPS
and TFTP.
Firmware Server Path – The IP address or
domain name of the firmware server (the
location of the firmware files) .
Automatic Upgrade Interval – Enter the frequency (in minutes) in which the
HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration
changes.
Automatic Upgrade – The default setting is "No." Choose "Yes" to enable automatic.
HTTP/HTTPS/TFTP upgrade and provisioning. When set to "No", the IP Camera will only
perform a HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the
boot process.
Performing a firmware upgrade:
1. Download the firmware package from http://www.grandstream.com/firmware.html.
2. Unzip the firmware package and copy the files to the firmware upgrade server
directory.
Upgrades are supported via TFTP, HTTP and HTTPS.
3. Log in to the Maintenance page of the GXV3501/GXV3504. Select the server type
from the dropdown list under the "Upgrade Via" field. Enter your server‟s root
directory in the "Firmware Server Path" field.
4. Reboot the GXV3501/GXV3504 to begin the firmware upgrade process.
GXV3501/GXV3504 Administrator Page
All current users will be list in the User List section of this page. You can also add and remove
users here.
Firmware 1.0.2.3
Grandstream Networks, Inc. 11/2009
GXV3501/GXV3504 Digital Video Server
Page 22 of 34