Sony VPL-DX125 Protocol Manual page 28

(1) Item Error
This error occurs when the Item No. of a request is illegal or its data is illegal. The conditions for occur-
rence of the respective errors are shown below.
Invalid Item
An unsupported Item No. is specifi ed.
Example 1: The unsupported category code A**h is specifi ed.
Example 2: The unsupported Item No. 8010h is specifi ed.
Invalid Item Request
The Item No. is supported but an unsupported Request is issued.
Example: An attempt is made to set data in the Model Name (8001h).
Invalid Length
Data length of the specifi ed Item No. is too long.
Example: An attempt is made to set 25 bytes data in the installation location (8003h).
Invalid Data
Data of the specifi ed Item No. is outside the setting range.
Example: An attempt is made to set 101 in the Item when the setting range of the Item is 1 to 100.
Short Data
The length of data is shorter than the value specifi ed by the data length.
Example: The actual data length is 9 bytes but the specifi ed value is 10.
Not Applicable Item
An item that is not valid at present is specifi ed.
Example: The item to switch the display is specifi ed when the main power is off.
(2) Community Error
This error occurs when community is different.
Example: "ABCD" is specifi ed when "SONY" is set.
24 (E)
VPL-EX225