Medion MD 30227 Quick Start Manual

Channel Programming

1. Connect the power cord to the AC inlet terminal and to a properly grounded power outlet.
2. Press the main power switch beside the AC inlet terminal.
3. Press the power button on the front of the LCD TV or press
4. To begin channel scanning, toggle to SCREEN II on the remote and press MENU on the touch screen of the universal
remote control to bring up the menu screen on the LCD TV. Press
the submenu. Highlight the AUTOSCAN with the
Press 4 to select YES. The LCD TV will automatically scan for available channels.
5. After the channel scanning is complete, the channel screen appears and you can begin watching TV.

Additional Information

Wall mount brackets are available for purchase.
Please call (866) 633-4660 or visit www.medionusa.com for additional details.
MD30227QSG_v2
(POWER) on the remote control.
5 6 buttons to highlight TUNER; press
5 6 buttons on the touch screen of the universal remote control.
1-2
The accessory box contains the user's manual, quick start guide, remote control, power cord, component video
cable, composite video cable, audio cable, 75Ω antenna cable and VGA cable.
Make sure that all components are turned off
before making connections.
Video Connections*
Your LCD TV is equipped with several different
input types. To achieve best picture/signal
quality, use the best connection types available
on your components. The illustration on the
right shows the connection types from best
(component) to worst (RF/Coaxial).
4 to enter
10/29/04, 9:38 AM
27" Flat Panel LCD TV

Check Supplied Accessories

Make the Connections

Green Blue Red
Component Video
S-Video
Yellow
Composite Video
RF/Coaxial
* Each video connection requires a separate audio connection.

Side Panel | Audio Connections

Subwoofer
Earphones
Side Panel | Composite & S-Video Connections
CAMCORDER
GAME CONSOLE
Q S G
UICK TART UIDE