Advertisement
WARNING:
Before beginning workouts with this or any other exercise unit, please consult with your physician.
This is especially important for people over the age of 35 or individuals with pre-existing health
problems. Please read instructions in full before using this unit. The Endorphin Corporation
assumes no responsibility for personal injury or property damage sustained by or through the use
of this product.
SAFETY PRECAUTIONS:
1. Consult your physician before using this exercise equipment.
2. Keep hands, feet, and head away from moving parts and adjustment tubes.
3. Minors should not workout alone - only with strict adult supervision. This equipment is not
recommended for use by children under 15 years of age. Young children should be kept clear
of the unit at all times to prevent injury.
4. Ensure that all adjustment pins/knobs are fully secured before using the machine.
5. Report product defects to the facility owner and DO NOT use until repairs are made.
Do not alter or modify this equipment.
6.
ASSEMBLY:
The Endorphin 335 Independence Exercise Chair requires some assembly when received. Care
is to be taken when removing the unit from the box as the unit weighs over 70 lbs and may require
two people to remove from the box. The unit will roll through a 32" doorway.
•
Step 1 - Upon removing all the components from the box. Screw the adjustment clamping
levers (3) into position on the main frame at the seat and handle adjustment tubes.
•
Step 2 - Secure the 2" roller wheels (2) to the outside of the bracket located at the rear of
the unit with the 5/16" bolts and nuts provided.
•
Step 3 - Secure the seat pads to the support tube. The logo pad should be located as the
back pad with 2 - 5/16" Bolts and the seat are secured with 3 – 5/16" bolts. Slide the
assembly into the seat adjustment tube and secure in place with adjustment handle.
•
Step 4 – Insert the handles into the adjustment tubes on either side of the seat and secure
in place. Using the positioning decals ensure that both handles are positioned at the same
height in the adjustment tube. The handles should be pointing forward and parallel to the
seat.
Important: Before operating this unit, please carefully read this instruction manual and check all
fasteners, nuts, and setscrews to ensure that they are tight. Shipping may have caused parts to
loosen during transit to your location.
4
Advertisement
