Advertisement
4
CONNECTING THE BUILT-IN AMPLIFIER (Ctd)
The digital filter is carried out inside the acoustic processor.
Connect the digital cable to the digital input connector. Since a digital Spdif cable carries 2
channels, you may link the digital output to the next speaker to transfer the second channel.
The Logos 3N is automatically powered ON when it receives modulation. When the digital
input does not receive any data for 3 seconds, the subwoofer is muted. It is de-muted as
soon as a signal is present on the digital input and the orange led will light up.
Main power must not to be removed while the Logos 3N is not muted (please wait 3
seconds after the music stops before removing the mains power).
5
RUNNING-IN THE LOGOS 3N
The Logos 3N has been tested at the factory. However, as any high quality speaker
system, the Logos 3N needs several days playing music before reaching the top sonic
quality they are built for. The few first hours can be very frustrating for a demanding
listener.
Do not hesitate to let them play quite loud for some time before attempting any real system
tuning or position adjustment.
GOLDMUND
LOGOS 3N -
SUB-BASS SPEAKER
- 7
Advertisement
