Table of Contents
Advertisement
8. Remote control/SPL meter
The Remote Control / SPL Meter supplied with the Mezzo 9 is included to
aid the set-up and in particular the setting of the Notch/Boost Filters if
required. It may also be used to correctly set-up satellite speaker levels
when used in conjunction with an AV receiver.
SPL
Press to activate SPL meter. Press and
hold to change range from 1dB (fine
measurements)
to
2dB
measurements, recommended for initial
set-up).
Back
Press to exit current menu selection and
return to volume control.
Standby
Press to put the subwoofer in and out of
standby.
Navigation
Press to navigate through menus as
with control wheel on top of subwoofer.
Menu
Press to enter set-up menu and to make
selections within menu structure.
Night
Press to turn night modes on and off.
Source
Press to choose between the LFE and
Line / High Level inputs.
Compare
When
this
button
is
Notch/Boost, Phase and Dynamics are
deactivated, press again to reactivate
features. Use this function to compare
response of subwoofer with and without
DSP features.
Movie /
Music /
Games
Press these buttons to choose between
the saved presets.
See the "Acoustic set-up procedure" section of this manual for more
information.
8
(coarser
pressed,
9. Operating instructions
The custom-made user interface on top of the Mezzo 9 subwoofer shows
the current status and allows you to set-up the DSP features.
Enter / Set-up
Press to enter set-up menu and accept changes. This action is
represented by the
symbol.
Control wheel
Use to adjust volume / settings and cycle through menu items. This action
is represented by the
symbol.
Presets/Save presets
The Mezzo 9 has the ability to save 3 presets: Music, Movies, and Games.
The three presets can contain completely different settings for level,
crossover frequency, input, notch filtering, dynamics etc.
Setting a preset is simply a matter of setting your desired adjustments,
then pressing and holding the Presets button for 3 seconds. The Mezzo 9
will ask which of the 3 presets you wish to save the current adjustments
in. Rotating the Control Wheel moves to the next preset. Press enter when
you have the right preset or press Back (or wait a few seconds) to cancel.
To recall a preset simply press the Presets
button is pushed the Mezzo 9 cycles to the next one.
Back
To go back to a previous item or functions. This action is represented by
the
symbol.
button, each time the
Hide quick links:
Advertisement
Table of Contents
