Changing The Reference Pitch - TC Electronic PolyTune Clip Manual Manual

Changing the reference pitch

In most cases, you may want to tune your what
is considered standard pitch, where the A above
the middle C has a frequency of 440 Hz.
However, you and your band may prefer a differ-
ent pitch, or you may have to tune to an acoustic
instrument that cannot easily be retuned. In that
case, you need to change the reference pitch.
– To change the reference pitch, press the Dis-
play Mode Button and the Tuning Mode But-
ton simultaneously.
The display will show the current reference
pitch (e.g. "440" for 440 Hz).
– To increase the reference pitch in 1 Hz steps,
press the Tuning Mode Button.
– To decrease reference pitch in 1 Hz steps,
press the Display Mode Button.
– To accept the currently displayed reference
pitch and return to normal operation, do not
press either button for two seconds. The set
reference pitch will blink three times.
The selected reference pitch will be stored and
preserved even when you change the battery.
PolyTune Clip English Manual
How to use PolyTune Clip
10