Configure Dt-300N Lan Ip Address - Cerio DT-300N User Manual

 Hostname: Host Name that you register to Dynamic-DNS service and export.
 User Name & Password: User Name and Password are used to login DDNS service.
Click Save button to save your changes. Click Reboot button to activate your changes

2.4 Configure DT-300N LAN IP Address

Here are the instructions for how to setup the local IP Address and Netmask. Please click on
System -> LAN and follow the below setting.

LAN IP Setup : The administrator can manually setup the LAN IP address.

IP Address : The IP address of the LAN port; default IP address is 192.168.2.254

IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0

802.1d Spanning Tree :
The spanning tree network protocol provides a loop free topology for a bridged LAN
between LAN interface and 8 WDS interfaces from wds0 to wds7. The Spanning Tree
Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d.