Argus DC3550 User Manual page 80

The software will display the following messages after performing system detection with DSC in various operation modes
NO. On-screen Message
1 SRAM ERROR
2 TIMER NOT TICK
3 EEPROM ERROR
4 MEDIA NOT SUPPORT
FORMAT REQUIRE GO TO
5 SETTING MODE
6 WRITE PROTECT
7 LENS INIT ERROR
8 COMPRESS REEOR
9 NO CARD
10 MEDIA ERROR
76
FAQ (FREQUENTLY ASKED QUESTIONS)
Description of On-screen Time Point of Software
Message detection
Detect when starting up
TIMER does not work Detect when starting up
Detect when starting up
Media is not supported Detect when starting up Key failure
Detect when starting up Key failure
Write function is
protected Detect when deleting
The initial value of Lens
is not set up correctly Detect when starting up Key failure
Data is not compressed Detect when fetching
correctly data
CF card is not inserted Detect when starting up
Media failure Detect when starting up Key failure
Action Response after
detection Possible Reasons
Shut down in a few
seconds SRAM fails to read data
ERROR Warning displays
when it is set up REAL TIME system failure
Shut down in a few
seconds EEPROM read/write failure
CF CARD over 256M is
not supported
CF CARD over 32M is
required to FORMAT
Protected files can not be
deleted; You must set up
Delete action failure Release PROTECT firstly
The initial value of lens
had not been defined in
the software
Compress data failure;
Compress action failure Please reset it.
Key failure when reading
data CF CARD is not inserted
CF CARD Failure