Engine Power Messages; Fuel System Messages; Lamp Messages; Ride Control System - GMC 2012 Canyon Owner's Manual

Gmc 2012 canyon
Hide thumbs Also See for 2012 Canyon:
Table of Contents

Advertisement

5-24
Instruments and Controls
OIL
This message displays when the oil
pressure is low. See Engine Oil
Pressure Light on page 5 17 and
Engine Oil on page 10 10 for more
information.

Engine Power Messages

REDUCED POWER
This message displays when the
vehicle's engine power is reduced.
Reduced engine power can affect
the vehicle's ability to accelerate.
If this message is on, but there
is no reduction in performance,
proceed to your destination. The
performance may be reduced the
next time the vehicle is driven. The
vehicle may be driven at a reduced
speed while this message is on, but
acceleration and speed may be
reduced. Anytime this message
stays on, the vehicle should be
taken to your dealer for service as
soon as possible. Press and release
the reset stem to acknowledge the
message and clear it from the
display.

Fuel System Messages

FUEL CAP
This message displays if the
vehicle's fuel cap is either off or
loose. Pull over as soon as possible
and check to see if the fuel cap is
secure. You may also see the check
engine light on the instrument panel
cluster. If the check engine light
does come on when the fuel cap
was loose, it may take a few driving
trips before the light turns off. See
Malfunction Indicator Lamp on
page 5 12 for more information if the
light still remains on. Press and
release the reset stem to
acknowledge the message and
clear it from the display.
I n f o r ma t i o n P r o v i d e d b y :
LOW FUEL
This message displays if the level of
fuel in the vehicle is low. Also check
the fuel gauge. See Fuel Gauge on
page 5 8 for more information. Refill
the fuel tank as soon as possible.

Lamp Messages

TURN SIGNAL
This message displays when the
turn signal is on for about 1.2 km
(0.75 miles) of travel. Press and
release the reset stem to
acknowledge the message and
clear it from the display.

Ride Control System

Messages

SERVICE STAB (Stability)
SYS (System)
This message displays if there is a
problem with the StabiliTrak system.
Have your vehicle serviced by your
®
dealer. See StabiliTrak
System on
page 9 44 for more information.

Advertisement

Table of Contents
loading

Table of Contents