Table of Contents
Advertisement
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port: You may select [Enable] or [Disabled] for this
onboard infrared port feature.
OnBoard Parallel Port: Select Parallel Port address or disable Parallel Port.
Configuration options: [Auto], [Disabled], [378], [278].
Parallel Port Mode: Set the operation mode of the parallel port. The
OnBoard Midi Port: Select address for Midi Port or disable Midi Port.
Midi IRQ Select: Use this to select Midi IRQ.
OnBoard Game Port: Select address for Game Port or disable Game Port.
Configuration options: [Disabled], [200h], [208h].
OnBoard PATA-IDE: This allows you to enable or disable the onboard Parallel
IDE controller.
OnBoard LAN: This allows you to enable or disable the onboard LAN feature.
OnBoard AC'97 Audio: Select [Disabled], [Auto] or [Enabled] for the onboard
AC'97 Audio feature.
System Hardware Monitor: You can check the status of the hardware on your
system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
CPU Temperature
M/B
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
F1:Help
Esc:Previous Menu
This Manual: http://www.manuallib.com/file/2595543
default value is [ECP+CPP]. If this option is set to [ECP+EPP], it will
show the EPP version in the following item, "EPP Version".
Configuration options: [Disabled], [330], [300], [290], [292].
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
System Hardware Monitor
35 C / 95 F
Temperature
27 C / 82 F
3110 RPM
0 RPM
1.60 V
3.31 V
4.97 V
12.16 V
:Select Item
+/-:Change Values
Enter:Select
Sub-Menu
[ Setup Help ]
F9:Setup Defaults
F10:Save & Exit
2 9
Advertisement
Table of Contents
