Table of Contents
Advertisement
1 General Information ........................................................................... 4
1.1 Main Features ................................................................................. 4
1.2 For Your Safety .............................................................................. 5
1.3 Unpacking ....................................................................................... 5
1.4 General Operation of STB ........................................................... 5
1.5 Front Panel...................................................................................... 6
1.6 Front Panel Display ...................................................................... 6
1.7 Rear Panel ....................................................................................... 7
1.8 Remote Control Unit ..................................................................... 8
1.9 Keys specification ......................................................................... 9
2 Installation of STB ............................................................................10
2.1 Connecting to Antenna and TV ...............................................10
2.2 Connecting to TV using RCA Support ................................... 11
2.3 Connecting to TV using S-VIDEO Support .......................... 11
3 Menu Information .............................................................................12
4 User Installation ................................................................................12
4.1 Antenna Setup - 1) DiSEqC 1.2 ...............................................13
4.1.1 East West Limit ......................................................................... 13
4.1.2 Reset DiSEqC limit ...............................................................14
4.2 Antenna Setup - 2) Fixed ..........................................................15
4.3 Channel Search - 1) DiSEqC 1.2 .............................................15
4.4Channel Search - 2) Fixed ..........................................................18
4.5 System Setting .............................................................................18
4.6 Parental Lock ...............................................................................19
4.7 Factory Default .............................................................................21
Table of Contents
1
Advertisement
Table of Contents
Related Manuals for coship CDVB 2300C
Summary of Contents for coship CDVB 2300C
-
Page 1: Table Of Contents
Table of Contents 1 General Information ................4 1.1 Main Features ................. 4 1.2 For Your Safety ................5 1.3 Unpacking ..................5 1.4 General Operation of STB ............5 1.5 Front Panel..................6 1.6 Front Panel Display ..............6 1.7 Rear Panel .................. - Page 2 5 General Viewing Function ..............21 5.1 Select Channel ................21 5.2 Previous Channel Recall ............22 5.3 TV & Radio Mode .................22 5.4 TV & VCR Mode ................22 5.5 Channel Information ..............22 5.6 Volume & Audio Control .............23 5.7 Position ...................23 5.8 Sat ....................23 5.9 Favourite List ................24 6 Channel Manager ................24 6.1 Channel Manager .................24...
- Page 3 Table of Figures, Charts and Tables Figure 1:Front Panel Figure 2:Rear Panel Figure 3:Remote Control Unit...
-
Page 4: General Information
1 General Information This digital s atellite receiver allows you to view a variety of satellite programs. This user’ s guide c overs the installation of t he STB and the nec essary st eps to operate various features. It also explains special features available only in this STB in detail, and will allow you to take full advantage of these features. -
Page 5: For Your Safety
1.2 For Your Safety Allow clear space around the STB for sufficient ventilation Do not c over the receiver or place it on a unit that emits heat Use a soft cloth and a mild solution of washing liquid to clean the casing Do not c onnect or modify cables when the STB is plugged in Do not remove the cover Do not allow the unit to be exposed to extreme heat, cold or humid conditions... -
Page 6: Front Panel
1.5 Front Panel STANDBY: Show the STB is under STANDBY mode LOCK: Signal lock lamp INTENSITY DISPLAY: Shows channel number, error mes sages, etc When watching a channel, adjust the volume or move to the left or right item in th e menu. -
Page 7: Rear Panel
1.7 Rear Panel DIGITAL AUDIO: Connect to TV for digital audio output LOOP OUT: Connect to another receiver (IF loop through output from digital tuner) RS232: Connect to a PC for software upgrade 0/12V: Connect to an external 0/12V switch L-AUDIO/R-AUDIO: Connect to TV or audio tuner S-VIDEO: Connect to the S-VHS jack of the TV or VCR TV: UHF RF output to TV set’... -
Page 8: Remote Control Unit
1.8 Remote Control Unit... -
Page 9: Keys Specification
1.9 Keys specification Press to t emporarily cut off the sound Switch between TV and Radio mode Display the satellite list of searched channels Enter number of the required menu item or select a channel number to watch Switch back to previous channel Move cursor up/down/left/right Return to the previous menu on the menu screen or escape from the item When watching a channel, adjust the volume... -
Page 10: Installation Of Stb
2 Installation of STB This section explains the installation of t he receiver. Refer to the manuals supplied with the equipment for the installation of outdoor equipment such as the dish antenna. When adding new equipment, be sure to refer to the related parts of the manual for the installation. -
Page 11: Connecting To Tv Using Rca Support
2.2 Connecting to TV using RCA Support 2.3 Connecting to TV using S-VIDEO Support... -
Page 12: Menu Information
3 Menu Information Once you have installed and connected the cables of the receiver, the menu will be displayed. This menu consists of 5 menu options as shown below. Channel Manager Program Guide Timer User Installation Receiver Information During the installation the OK key confirms a selection and key shows the Drop Down List Box. -
Page 13: Antenna Setup - 1) Diseqc 1.2
4.1 Antenna Setup – 1) DiSEqC 1.2 1. Antenna : You can select a maximum of 16 antennas with the combination switches. 2. Type : Select your antenna type to be DiSEqC1.2. 3. Satellite : Select first satellite you want. 4. -
Page 14: Reset Diseqc Limit
4.1.2 Reset DiSEqC limit If you want to res et t he E ast limit or Wes t limit, place t he cursor on Reset DiSEqC Limit button and then press OK key on the RCU. The mess age “ Would you like to reset limit for DiSEqC positioner?”... -
Page 15: Antenna Setup - 2) Fixed
4.2 Antenna Setup – 2) Fixed 1. Antenna : You can select a max imum of 16 antennas with the combination switches. 2. Type : Select your antenna type to be fixed. 3. Satellite : Select satellite you want. 4. LNB Type : Select your LNB type. If you have universal LNB, select Univ. - Page 16 3. Posi tion : After selecting a satellite, please select Posi- tion button and then keep pressing key on the RCU until the selected satellite is locked. If the satellite is locked correctly, the color of the signal label bar will change to yellow. When you press ok key on the RCU, the message “...
- Page 17 9. Set PID: If you want to set PID (Packet Identifier) manually, select TP in the “ Channel Search Page” and press MENU key on the RCU t o display the command box.Then s elec t SET PID command and press ok. The set PID menu will be displayed. Enter the correct value and select ok.
-
Page 18: Channel Search - 2) Fixed
If y ou s elec t S ort by S cram ble , The S TB sorts the scrambled channels automatically. If you s elec t Not sea rche d TP onl y, the STB searches channels in the TP which were not searched. If you s elect FTA Only, The STB only searches free t o air channels under this satellite. -
Page 19: Parental Lock
3. LNB power: If y our STB is connected t o the LNB, select YES. But if your STB is connected to another receiver through Loop Through support, you should check which receiver is connected directly to t he LNB. In cas e the other receiver is directly connected to the LNB, then select OFF. - Page 20 How to change the Password 1. Enter the current password. 2. Select ON of Parental Lock. 3. Enter new password. 4. Confirm your new password entering new password again. Note: Default password is 0000. Warning: Once you change the password, please keep it safely. How to use Parent Lock 1.
-
Page 21: Factory Default
4.7 Factory Default If you want to bring the STB back to the factory default condition, select Factory Default and press the ok key. Then a warning message will be displayed. To confirm, select ok . Warning: On selecting factory default you will lose all of data and information, which was previously installed. -
Page 22: Previous Channel Recall
5.2 Previous Channel Recall Press RECALL key on the RCU to move to the previous chan- nel you watched. 5.3 TV & Radio Mode While viewing a TV channel, press the key on the RCU to toggle between TV and Radio modes. 5.4 TV &... -
Page 23: Volume & Audio Control
5.6 Volume & Audio Control 1. Volume Control To increase or decrease volume, use VOL+/- Key on the RCU on the front panel. Note: The S TB has 18 volume levels and this c an be con- trolled from the volume level of your TV. 2. -
Page 24: Favourite List
Select one satellite you want, press OK key on the RCU then you will have a channel list of your choice. 5.9 Favourite List To create a favorite group list press FAV key on the RCU. You can ac cess the next favorite group when you press FAV key again. -
Page 25: Favorite Channel
6.2 Favorite Channel When you select channel manager, default favorite list will be shown on screen as Favorite 1. Select your favorite channel and then press OK key. Then will be marked next to your selected channel name. If you want to remove the channel name from the favorite chan- nel list, press OK key onc e again, t hen the mark will disappear. -
Page 26: Lock Channel
Select a channel by pressing OK key and move the cursor to the location where you want to move the selected channel and pres s OK key. Then, you will find that the selected channel has moved to the desired location and channel the number has changed accordingly. -
Page 27: Delete Channel
6.6 Delete Channel In the Channel manager, y ou can enter Delete CH mode, if you press Delete key (Red color key) on the RCU. Then, if you press Delete key (Red color key) repeatedly, the mode will cycle through Delete TP -> Delete Satellite -> Delete All -> Delete CH. -
Page 28: Receiver Information
7 Receiver Information In the Main Page, select Receiver Information and press OK key on the RCU to enter the s ub menu, In this menu you can view the following receiver information, including product , SW version, HW version. 8 EPG (Electronic Program Guide) STB provides EPG function for you to get acc ess t o the TV Guide (or Radio Guide if you are listening to radio channels) -
Page 29: Timer
9 Timer You can adjust the real time as well as you can program the timer in various ways. This function is one of the strong points of the unit. 9.1 Time Adjust Usually you get the information real time from t he satellite automatically but sometimes they transmit wrong information. - Page 30 Aft er entering the correct value of your pos ition, place y our curs or on Comput e and press the OK key. The STB shows the ex act information of antenna.
-
Page 31: Menu Tree Of Stb
11 Menu Tree of STB First Time Installation Welcome Menu System Setting User Installation User Installation Language Antenna Setup Channel Search PICTURE Timer Channel Search Time Adjustment Search 1 Sat/TP/Network Menu Navigation Receiver Information Product Main Menu Sw Version Channel Manager Hw Version Program Guide Timer... - Page 32 Antenna Setup Help Main Menu Antenna Setup Satellite Channel Manager Antenna Program Guide Latitude Type Timer Longitude Satellite User Installation 1. Compute LNB Type Receiver Information LNB Freq.1 LNB Freq.2 Compute 0/12V Volt Azimuth User Installation 22 KHz Tone Elevation Antenna Setup DiSEqC Channel Search...
-
Page 33: Technical Specification
12 Technical Specification TRANSMISSION STANDARDS DVB, MPEG-2 INPUT/ DEMODULATION Connector Type 2X F Type, 3/8-32UNEF-2A (1 input/1 loop through) Input Frequency 950 to 2150 MHz Signal Input level -65 to – 25 dBm Band Switch control 22 KHz LNB Supply 13.0 + 0.5 V / 18V + 0.7 V, max 400 mA Demodulation Type QPSK / FEC Coding (DVB prETS 300 421) - Page 34 DATA SERVICE PORT Connector 9-pin D-sub female Data protocol RS232C interface. The DVB-DSR is seen as the Data Communication Equipment (DCE) and the PC (or other terminal) is seen as the Data Terminal Equipment (DTE). Data rate Maximum of 625K bits/s POWER SUPPLY Type Switching mode...
- Page 35 PHYSICAL CHARACTERSTICS Front Panel Keys 6 Keys Indicators Power on/off Remote control input Infra-red receiver Display 4Digit (7Segment) Rear Panel Connectors 1 LNB Input / 1 Loop through output (2F-type) 1 x S/P DIF 1 x 0/12 Volt (RCA) 2 x Audio L/R (RCA) 1 x Video SIGNAL (RCA) 1 x RS-232 (9-pin D-sub female) 1 x RF Modulator (IEC169-2)
-
Page 36: Trouble Shooting
13 Trouble Shooting Problem Possible Causes What To Do The display on the Main cable is not Check that the main cable front panel does connected. plugged into power not light up. socket. No sound The unit is in standby Press the standby button. - Page 37 Problem Possible Causes What to do There is The system is connected Change the receiver output ain cable interference on using RF leads and the channel to a more suitable power your digital output channel of the channel, or connect the satellite channel.
Need help?
Do you have a question about the CDVB 2300C and is the answer not in the manual?
Questions and answers
What Is the password
The default password for the Coship CDVB 2300C is 0000.
This answer is automatically generated