Page 1
User’s Manual Digital Cable Receiver N8783C User’s Manual...
Page 2
User’s Manual Safety Instruction When using the receiver, basic precautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.
Page 3
User’s Manual receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. DOLBY Mark This mark appears on front panel of this receiver, painted prominently in contrasting color to background. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
User’s Manual Contents 1. Before Using the Receiver ....................2 1.1 Main Feature ......................... 2 1.2 Front Panel ........................3 1.3 Rear Panel ........................3 1.4 Remote Control Unit (RCU) ..................4 2. Installation ..........................5 2.1 Signal Input ........................5 2.2 Connect TV ........................
User’s Manual 1. Before Using the Receiver 1.1 Main Feature Dolby 5.1 and DDPLUS supported EPG supported favorite channel groups Memory space up to 5000 channels Support auto and manual search Powerful channel editing function ...
User’s Manual 1.2 Front Panel 1.3 Rear Panel Name Function 1. CABLE IN Connect to CATV network 2. CH 3/4 OUT Output ch3/4 signal Output video and audio signal to TV (support high definition 3. HDMI output) 4. USB Connect to USB device 5.
User’s Manual 1.4 Remote Control Unit (RCU) Name Function 1. Learning keys Please refer to Learning Key. 2. The keys of the receiver Switch between operation and standby modes Mute Mute/restore sound 0 ~ 9 Switch channels or input numbers PG+/- Switch channels or page up/down Last...
User’s Manual 2. Installation Connect TV and other devices, then you can power on the receiver and search channels. 2.1 Signal Input Connect CABLE IN port on the receiver to CATV network with an RF cable. 2.2 Connect TV Connect HDMI port on the receiver to HDMI port on TV.
User’s Manual Note: If you encounter any problem during the connections, please contact your local operator. 2.3 Power on 1. Connect one end of power adaptor to the receiver. 2. Connect the other end of power adaptor to power socket. 3.
User’s Manual 3. Appendix 3.1 Trouble Shooting DISPLAY on front panel is off 1. Power adapter is disconnected. Make sure power adapter is plugged into a proper power socket. 2. The receiver is turned off. Turn it on. DISPLAY on front panel is on, but no sound and picture on TV screen The receiver is in standby mode.
User’s Manual 3.3 Acronym Conditional Access CVBS Composite Video Broadcast Signal Digital Video Broadcasting Electronic Program Guide Free to Air Hard Disk Drive HDMI High Definition Multimedia Interface HDTV High Definition Television Lighting Emitting Diode Network Information Table On Screen Display Over the Air Personal Video Recording Radio Corporation of America...
Need help?
Do you have a question about the N8783C and is the answer not in the manual?
Questions and answers