Page 2
Thank you for purchasing BREO iSee310. Please read this manual carefully before using the product, and keep it in a safe place for future reference.
Introduction iSee310 adopts air pressure and hot compress massaging technology. It rubs, presses, hot compresses, and massages the ocular region in order to relax it. Inside the Package The package includes: Main Unit, Controller, AC Adapter, Batteries, User Manual. Controller...
Preparation Prior to use, check the integrity of the machine and accessories: No damage on connection between controller and main unit Battery power is sufficient No damage on AC adapter Power Options 1. Batteries Open the battery cover on the back of the controller. Install 3 AA batteries in accordance with the positive and negative poles.
Operation Power on – Press and hold Button Preset default is air pressure + hot compress for 15 minutes. Manually operate related function buttons to switch between air pressure and hot compress modes. Power off – Press and hold Button again Manual mode ON-OFF/Hot compress Button –...
Precautions Please read the manual carefully and operate accordingly. Children under 7 years old cannot use the massager. This massager should not be used by: People who suffer from brain disease or have undergone brain surgery People who are suffering from glaucoma, retinoschisis, or other serious eye diseases People who have physical or mental disorder Take off contact lenses/eye glasses before use.
Page 9
This product is not a substitute for healthcare professionals' advice and treatment. In case of doubt or if necessary, please consult your healthcare professional. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inter- ference that may cause undesired operation.
Troubleshooting & Technical Parameters When operational problems occur, please refer to the chart below. Do not disassemble the machine or try to repair it by yourself. Problem Possible Reason Possible Solution Cable is broken / in bad Check the condition of the cable condition Batteries are low / out Change batteries...