Huawei LTE E8372 Quick Start Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Modem
  5. LTE E8372
  6. Quick start manual

Huawei LTE E8372 Quick Start Manual

Hide thumbs Also See for LTE E8372:
Table of Contents

Advertisement

Quick Links

Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Huawei LTE E8372

Summary of Contents for Huawei LTE E8372

  • Page 1 Quick Start Guide...
  • Page 2 Note: This guide briefly describes the appearance of the LTE E8372 and the steps for using the LTE E8372. For details about how to set the device and Wi-Fi management parameters, see help information on the device management web page at http://huawei.setup or...
  • Page 3 Getting to Know Your LTE E8372 The following figure shows the LTE E8372. The actual product may look different.

  • Page 4: Usb Connector

     USB connector Allows the LTE E8372 to connect to a computer or power adapter (not included).  Wi-Fi indicator Indicates the status of a Wi-Fi network. Steady green: The Wi-Fi function is turned on.  Off: The Wi-Fi function is turned off or the LTE E8372 has been removed.
  • Page 5 Blinking green twice every 2 sec: The LTE E8372 is powered on.  Blinking green once every 0.2 sec: The software of the LTE E8372 is being upgraded.  Blinking green once every 2 sec: The LTE E8372 is registered with a 2G network.

  • Page 6: Getting Started

    Getting Started 1. Remove the cover from the LTE E8372 by sliding it off. Note: Make note of the SSID and Wi-Fi network key which are printed on the LTE E8372, as shown in the following diagram.
  • Page 7 2. Insert the SIM card and the microSD card (not included in package) into the corresponding card slot, as shown in the following figure. 3. Replace the cover and slide it into place. Note: Ensure that the bevelled edge of the SIM card is properly aligned with that of the SIM ...
  • Page 8  in the data stored on the card becoming corrupted. Please only use compatible SIM cards to avoid damage to your LTE E8372 and SIM card.  The microSD card is an optional accessory and is not included in the package.
  • Page 9 Connection Scenarios Scenario 1: One-device Internet access Scenario 2: Multi-device Internet access using computer using Wi-Fi (connected to a computer)
  • Page 10 Scenario 3: Multi-device Internet access using Wi-Fi (connected to the power adapter)

  • Page 11: Using As A Usb Modem

    The procedure for installing the device management software may vary depending on your computer's operating system. The following instructions are specific to Windows 7 OS. Connecting to a Netw ork 1. Connect the LTE E8372 to one of your computer's USB ports.
  • Page 12 The drivers are installed automatically in the background. 2. When the installation is complete, the LTE E8372's device management web page (http://huawei.setup or http://192.168.8.1) is displayed and the LTE E8372 connects to the LTE network automatically. Note: If the driver installation does not run automatically, find the AutoRun.exe file in the ...
  • Page 13 LTE E8372, or restart the computer. Disconnecting from a Network Before you remove the LTE E8372, make sure that the data connection has been disconnected Unplug the LTE E8372 from your computer or disconnect the LTE E8372's data connection through the device management web page at http://huawei.setup or http://192.168.8.1 or...
  • Page 14 1. Insert LTE E8372 into computer (or power adapter).. 2. Ensure that the LTE E8372's Wi-Fi function is on. The Wi-Fi indicator light should be on. 3. Search for Wi-Fi from your Wi-Fi device or computer to find the LTE8372’s Wi-Fi SSID, as detailed in the “Getting Started”...

  • Page 15: Accessing The Internet

    6. Wait until a wireless network connection icon is displayed in the lower right corner of the computer screen. A wireless network connection is set up. Accessing the Internet You can access the Internet after a connection between your LTE E8372 and Wi-Fi device is set up. Note: By default, the LTE E8372 automatically disconnects from the Internet when you are roaming.
  • Page 16 Using the LTE E8372 with a Power Adapter (Connection scenario 3) Connect the LTE E8372 to the power adapter's USB port, and connect the power adapter to a power outlet. Note: The power adapter is not included in the product package. Only use a USB power...
  • Page 17 Use of a power adapter not matching the recommended specifications may cause the  LTE E8372 to malfunction, fail, or could even cause a fire. Such use voids all warranties, on the product, whether expressed or implied. Please refer to the enclosed warranty...
  • Page 18 Ex am ple 1: Connecting a Game Console (for ex ample, P SP ) through Wi-Fi On the PSP, turn on the WLAN. Choose Settings > Network Settings. Select Infrastructure Mode. Select New Connection, and enter the connection name. Select Scan to search for wireless networks.
  • Page 19 Press the ► button to proceed to the next step, and then press the X button to save settings. Select Test Connection to test whether the network connection is successful. You can now open the browser and access the network.
  • Page 20 Ex am ple 2: Connecting a Tablet Computer (for ex am ple, iPad) through Wi-Fi Touch Settings > WLAN to turn on WLAN. The tablet computer automatically searches for wireless connections and displays a list of access points. Select the access point with the LTE E8372's SSID.
  • Page 21 Note: Any Wi-Fi enabled device can access the Internet through the LTE E8372. For specific operations, refer to the Wi-Fi device's user manual. Viewing Service Information Visit at http://huawei.setup or http://192.168.8.1 to view your wireless network service information. R estoring Factory Defaults...
  • Page 22 RESET Note: Restoring factory defaults deletes all the device's user-defined settings and restores all the settings on the web management page to their defaults. LTE is a trademark of ETSI. 31010***_01...

Table of Contents