Table of Contents
Advertisement
The HD Video Converter LED lights will illuminate different colours/ways to indicate
functions.
LED Status Chart
GREEN: flashing
or:
or:
or:
or:
GREEN: constant
or:
RED: constant
RED: flashing
Note:
RED and GREEN: flashing
720p/1080p status indicator
HDMI/analogue indicator
HDMI LED: on
HDMI LED: flashing
Analogue LED: on
Analogue LED: flashing
No USB storage device connected
Booting still in progress
HDD not supported - if flashing for extended amount of time
Cable not connected properly
USB storage device is full
Ready for plugging in USB storage device
HD Video Converter and setup is ready for recording
HD Video Converter is recording
New recorded file is saving - wait until the LED turns GREEN before
proceeding to next function
DO NOT remove storage device while HD Video Converter is saving
Content is HDCP-protected (refer to pg 7) and cannot be recorded
Indicates which resolution has been selected
Indicates which input signal has been selected
An HDMI cable has been plugged in and the input video signal source
is HDMI
Indicates a possible unstable/loose connection of HDMI cable or cable
needs a few seconds to be stable
Indicates that the input video signal may be YPbPr or composite
Indicates a possible unstable/loose connection of YPbPr/composite
cable or cable needs a few seconds to connect
17
Advertisement
Table of Contents
