INSTALLATION
Installation area
Select flat and firm floor.
Incorrect installation may cause severe noise and
break down.
The base openings must not be obstructed by car-
peting when the washing machine is installed on a
carpeted floor.
How to connect the drain hose
1
Insert the drain hose to the connecting
area at the body.
2
Push the hose clamp to the body to tight-
en it as shown in the figure.(Push the
The hose is placed
over doorsill
Less than 10cm
P/No.3828FW3144A
hose while the hose clamp is directed to
the top.)
Avoid submerging the end of the hose in the water.
6
Maintain more than 10cm
between the side of drain
hose and the wall.