Wagan Power Dome LT 2464 User Manual
  1. Manuals
  2. Brands
  3. Wagan Manuals
  4. Battery Charger
  5. Power Dome LT 2464
  6. User manual

Wagan Power Dome LT 2464 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Item No. : 2464
Power Dome
LT
®
User's Manual
BC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Dome LT 2464 and is the answer not in the manual?

Questions and answers

Related Manuals for Wagan Power Dome LT 2464

Summary of Contents for Wagan Power Dome LT 2464

  • Page 1 Item No. : 2464 Power Dome ® User’s Manual...

  • Page 2: General Warnings

    Power Dome LT by Wagan Tech ® ® Thank you for purchasing the Power Dome LT by Wagan Tech . With normal care and proper ® ® treatment it will provide years of reliable service. IMPORTANT INFORMATION • Please read and understand all warnings, cautions, and notes included in this manual before using the Power Dome LT.

  • Page 3: Specifications

    I2 volt, 10 Amps max USB Power Port 5V, 500 mA Work Light 3x LEDs Charging Time (AC) 48 hours Charging Time (DC—with engine running) 12 hours ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

  • Page 4: Front View

    Power Dome LT by Wagan Tech ® ® FRONT VIEW www.wagan.com...

  • Page 5: Rear View

    17. Jumper Cable (negative) 8. Inverter Power Indicator 18. Master Switch 9. DC Socket 19. Fuse 10. Air Compressor Hose 20. Jumper Cable (positive) ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

  • Page 6: Battery Status

    Power Dome LT by Wagan Tech ® ® BATTERY STATUS The voltmeter provides the current state of charge on the internal battery. It is the user’s responsibility to periodically monitor the battery’s status and recharge at least every 3 to 6 months in addition to recharging after each use.
  • Page 7 Connect red (+) clamp to vehicle chassis or a solid, non-moving, metal vehicle component or body part. DO NOT clamp directly to positive battery terminal or a moving part. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

  • Page 8: Air Compressor

    Power Dome LT by Wagan Tech ® ® • If vehicle to be started has a negative ground system: i. Connect the red (+) cable clamp first to the vehicle’s positive (red) battery terminal. ii. Next, connect the black (−) clamp to the vehicle chassis.

  • Page 9: Power Inverter

    8. Turn on your AC device/appliance. 9. After use, remove the appliance plug and close the dust cover. 10. Recharge the Power Dome as soon as it is convenient. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

  • Page 10: Dc Output Socket

    Power Dome® LT by Wagan Tech ® DC OUTPUT SOCKET The DC accessory socket can power a DC load up to 10 Amps. Overloading the socket will result in tripping (a self-resetting circuit breaker). Removing the overload automatically restores power to the DC socket.

  • Page 11: Troubleshooting

    Do not use the Power Dome’s inverter with low- in audio system. alternating current quality audio AC filtering system. shielding. Replace audio system with high quality noise filtering. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
  • Page 12 "Customer Care" page for instructions on how to process a warranty claim. WAGAN Corporation is not responsible for any shipping charges incurred in returning the item(s) back to the company for repair or replacement, nor is WAGAN responsible for any item(s) returned without an official Return Authorization number (RA#).

Table of Contents