Changing Capture Modes; Continuous Mode; Self-Timer; Deleting Photos - Argus DC1510 User Manual

NOTE: If you do not hear the "beep" and/or the frame counter does not count down 1 frame, the
photo has not yet been taken. Press Shutter button again to take the picture.
Tip:
It is recommended that you take a few trial shots at different distances to see the results of each
photo.

Changing Capture Modes

Continuous Mode

1. Press Mode button until
2. Hold down the Shutter button to take photos continuously until the frame counter counts down to
00.
NOTE: In Continuous mode, 6 photos will be taken in one second.

Self-Timer

1. Press Mode button until
2. Press Shutter button. A beep will sound and the LED will blink for 10 seconds before a photo is
taken.

Deleting Photos

Deleting All Photos

1. Press Mode button until
2. Press Shutter button and
button again. You will hear two beeps and all photos will be cleared.
NOTE: If Shutter button is not pressed while
LCD panel in 5 seconds.

Deleting Last Photo Taken

1. Press Mode button until
2. Press Shutter button and the last taken photo will be deleted and the frame counter will change in
the following pattern:
When camera is in High Resolution mode:
• Erasing the last 1,2 or 3 photos of low resolution will toggle frame counter unchanged.
• Erasing the last 4 photos of low resolution will toggle frame counter to go up by 1
• Erasing the last photo of high resolution will toggle frame counter to go up by 1
When camera is in low resolution mode:
• Erasing the last photo of high resolution will toggle frame counter to go up by 4
• Erasing the last photo of low resolution will toggle frame counter to go up by 1
is shown on the LCD panel
appears on the LCD panel
is shown in the LCD panel.
will flash in the LCD panel. While
is shown on the LCD panel
6
is flashing, press Shutter
is flashing, the frame counter will appear in the