Prior To Fi Rst Use; Unpacking The Product Contents; Cleaning The Device And Plates; Inserting And Changing The Plates - NEWEST SW-072B Instruction Manual

Sandwich maker
Table of Contents

Advertisement

Available languages

Available languages

Prior to fi rst use
Before you can use the device, you must:
unpack the product contents,
clean the device and the plates.

Unpacking the product contents

ATTENTION!
❐ Risk of suffocation! Keep the packaging material away from children and animals.
Unpack all parts and make sure that the scope of delivery is complete (see chapter "Device
overview and scope of delivery") and check for any damages from transport. If you identify
damages to the components, do not use them (!), instead contact the customer service
department.

Cleaning the device and plates

ATTENTION!
❐ There may be some production residues stuck to the device. To avoid health risks, clean the
individual plates thoroughly before fi rst use.
❐ Never submerge the device in water or other liquids! Make sure that the device, the mains
cord or the mains plug can not fall in water or are at risk of getting wet.
❐ Do not use any abrasive or scouring cleaners or cleaning pads to clean the device and the
plates. They could damage the device and plates.
1. Wipe off the device with a damp, soft cloth and dry it with a soft cloth afterwards.
2. Clean the plates with warm water and a mild detergent. Then dry them off completely with
a soft cloth.
3. Before preparing meals on the plates for the fi rst time, you should turn the device on and
let it operate without contents for a few minutes (but with the plates inserted!) in order
to remove any production residue on the plates with heat. This may produce odour(s) and
smoke. This is not a malfunction and is normal when using the device for the fi rst time. You
must repeat this process with all plate pairs when using them for the fi rst time!

Inserting and changing the plates

ATTENTION!
❐ Make sure that the device is not connected to a socket when inserting or changing the plates.
❐ Make sure that the device and the plates have cooled off completely before you take the
plates out of the device or exchange them with another pair of plates.
05297_DE-GB-FR-NL_V0.indb 25
05297_DE-GB-FR-NL_V0.indb 25
25
16.12.2013 10:14:50
16.12.2013 10:14:50

Advertisement

Table of Contents
loading

Table of Contents