Memory Function - Bonn CM–901T Owner's Manual

MEMORY FUNCTION

This microwave oven has 10 programmable pads (1~10).
1. Touch # pad.
2. Touch the number pads. ex)5
3. Touch POWER pad. (Select
4. Touch the NUMBER pads for
5. Touch START pad to save
6. Touch STOP/CLEAR pad.
NOTE 1: If you want cooking in two or three stage, repeat step 3~5 once or twice, and display will
show "STAGE-2" or "STAGE-3"./ STAGE-2 and STAGE-3 indicators light too.
After touching START pad to save cooking time and power level in 3-stage, you can see
" - END - " on the display
NOTE 2: In case of original set, number 1~10 is programmed but cooking data is changeable later.
When a power plug is unplugged from a power failure or an electric socket, the contents of the program
set up arbitrarily will be lost.
In that case, please set up a program again.
After programming is finished, just touch the NUMBER pad of the memory number you want to select.
Then 1.5 seconds, the oven automatically start cooking according to the pre-programmed cooking time and power
level.
* Preprogrammed Cooking Times and Power Level
Pad
1
2
3
4
5
6
7
8
9
10
desired power level.)
cooking time.
cooking time and power level
.
Cooking Time
20 sec.
40 sec.
1 min.
1:30 min.
2 min.
3 min.
4 min.
6 min.
8 min.
10 min.
The display will show "MEMOY ".
The display will show "PROG-05".
The MICROWAVE, % and Stage 1 indicators
light.
The display will show what you touched.
The display will show "STAGE-2" and long
beep sounds.
When you touch STOP/CLEAR pad,
MEMORY function ends.
Power Level
10
7
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %