Operation Procedure; Wattage Output Chart - Bonn CM–901T Owner's Manual

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 240V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the plate tray.
3. Shut the door. Make sure that it is firmly closed.
１The oven light is not on when the microwave
oven is operating or the door is opened
２ The oven door can be opened at any time
during operation by opening the door.
The oven will automatically shut off.
３Each time a pad is touched, a BEEP will sound ７If the START pad is touched and the oven does
to acknowledge the touch.
４The oven automatically cooks on full power
unless set to a lower power level.
５The display will show
when the oven is plugged in.
indicator)

WATTAGE OUTPUT CHART

The power-level is set by touching the POWER pad. The chart shows the display, the power level and
•
the percentage of power.
Touch POWER pad
once
twice
3 times
4 times
(
MICROWAVE
Power Level (Display)
7
６When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained.
To erase all information, touch the STOP/CLEAR
pad once more. If the oven door is opened during
the oven operation, all information is retained.
not operate, check the area between the door
and door seal for obstructions and make sure the
door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
100
80
60
40
4
Approximate Percentage of Power
100%
80%
60%
40%