Electrical Connection - LG 2P~32P Owner's Manual

I nstallation

Electrical connection

1
2
3
4
5
Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
Connecting water supply hose
After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type
NOTE
of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the
faucet into the adaptor.
8
▶Water supply pressure must be between 30kPa and 1000kPa (0.3~10kgf/cm
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression device should
be installed.
▶
2 )