Page 1
U s e r M a n u a l This Dashboard Camera (dash cam) is a specialized onboard device that continuously records video while the vehicle is in use. Some features may not be available depending on installation, driving conditions, and vehicle type. The video quality might vary for each device as a result of installed firmware.
THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements.
Handle with care. Drop, shock, and mishandling THINKWARE is NOT responsible for the loss of any the Product may result in malfunction and/or recorded video during operation. damage to the device.
1. Getting Started This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance. 1-1. In the Package Mount with 3M tape Adhesive Cable Holder Main Dash Cam Unit Car Charger (1ea) (5ea)
1-3. Product Overview Front view Rear view Left view Under view Name Description Camera Lens Front facing camera for video recording Mount Connector Connects to the windshield mount (refer to installation) Operation indicator lights that are used to visually indicate that the vehi- Security LED cle is equipped with a dash cam DC-IN...
The MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable item, it should be replaced periodically. THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory cards are used to minimize memory card error.
1-5. Vehicle Installation 1-5-1. Connecting the Device and the Mount Insert the mounting connector of the dash cam between the connector brackets of the mount. Use the screw to attach the dash cam to the mount. Remove the protective film from the camera lens. 1-5-2.
For more information on the power cable routing instruction, please visit Thinkware homepage. (www.thinkware.com) Preventing Vehicle Battery Discharge Depending on the make and model of your car, the power may be supplied to the dash cam even with the ignition turned off.
2. Basic Operations 2-1. Turning the Device Power On/Off Once connected to the vehicle, the device will automatically turn on and off with vehicle ignition. Operation LED Orange Light ON Power cable for vehicle...
Removing MicroSD card Double-click the Dash Cam Viewer(H50).exe file saved in the MicroSD card and install the program. Double-click the Thinkware Dash Cam Viewer icon after installation completes. The Viewer application screen will then appear. Leave the MicroSD card in the USB port of the PC.
Page 13
Select Setting ( ) icon from the PC Viewer. Select Dash Cam Setting > Set time zone and Get current time of your location. Once the correct time has been set, insert the Mi- croSD card immediately back in the dashcam and start the device to apply the changed settings.
2-3. Connecting External GPS Receiver(Optional Accessory) External GPS Receiver is available as an optional accessory that can be purchased from Thinkware autho- rized dealers. External GPS Receiver enables recording of vehicle locations in the video file for driving route tracking.
This technology uses proprietary file type which can only be viewed using dedicated THINKWARE AVI Converter or Thinkware PC Viewer. Both THINKWARE AVI Con- verter or Thinkware PC Viewer are available for download at Thinkware homepage (www.thinkware.com) and also included in the MicroSD card in the package.
2-5. Recording Videos While Driving 2-5-1. Continuous Recording Mode Videos are recorded in 1 minute segments and saved at a des- ignated location for continuous recording in the MicroSD card. Operation LED Green Light ON 2-5-2. Incident Recording During Continuous Recording Mode ...
2-6. Recording Videos While Parked (Optional Accessory) This feature is available only when the dash cam has been hardwired directly to the vehicle battery. Separate purchase for the hardwiring cable accessory and professional installation is required. 2-6-1. Incident Recording When the dash cam detects an impact, it will immediately store the 10 seconds prior and after the impact.
2-7. Manual Recording In addition to recording accidents, the dash cam allows the user to initiate manual recording mode to cap- ture scenery and/or places while driving. This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident.
The device restarts automatically after the upgrade has been com- pleted. Make sure your device is always up to date with latest firmware. Please check back frequently at THINKWARE website (www.thinkware.com) for the latest firmware updates. Operation LED Red Light Blinking...
The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card within the package. Please check THINKWARE homepage(www.thinkware.com) for the latest Dash Cam PC Viewer application.
Page 21
3-1-2. Installing Thinkware Dash Cam Viewer Windows Double-click the Dash Cam Viewer(H50).exe file saved in the MicroSD card to initiate program instal- lation. Double-click the application icon once PC Viewer installation completes and the application main screen will then appear.
Page 22
The MicroSD card will not be recognized by the software until it has been initialized in the dash cam. It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer.
Page 23
3-1-4. Thinkware Dash Cam Viewer Overview Switch to Map View Playlist File download to PC (It may take long Viewing screen time depending on the number of files selected for PC Playback download) Progress Current play time/ Displays location Total play time...
3-2. PC ViewerSetting 3-2-1. Setting Memory partition : Sets how storage space on the memory card will be allotted for each recording mode Settings Voice Recording : Sets the voice recording on/off and recording volume Voice Guidance : Sets the voice guidance on/off and the volume Impact Sensitivity :...
4. Specifications 4-1. Specifications The specifications of this product may change without prior notice for product improvements. Item Standard Note Model 76 x 30.5 x 38.4mm / 36.8g Size/weight 3.0 x 1.2 x 1.51inches / 0.08lbs Capacity MicroSD card 8GB /16GB/32GB Continuous Recording Mode Records in 1 minute segment Incident Recording Mode...
Need help?
Do you have a question about the DASH CAM H50 and is the answer not in the manual?
Questions and answers