Related Manuals for ZKaccess ZKSD3 Series
Summary of Contents for ZKaccess ZKSD3 Series
- Page 1 User’s Manual for ZKSD3 Series PTZ Dome IP Camera Document Version: 1.7 Date: 2012.12 Introduction This document mainly introduces the functional features, installation process and access methods of ZKSD3 series IPC.
-
Page 2: Important Notices
Important Notices Thanks for selecting our company’s IPC. Before use, please read through the user’s guide to avoid any unnecessary damage! All functions depend on the actual product. Since the product is subject to updating, our company is not responsible for any difference from this guide and not liable for any dispute over different technical parameters from this guide. -
Page 3: Table Of Contents
Table of Contents Table of Contents 1 Overview ........................ 1 1.1 Product Description ..................1 1.2 Product Features ..................1 1.3 Technical Parameters ................... 3 1.4 Product Appearance ..................5 1.5 Connecting Terminal ..................6 1.6 Basic Procedure ................... 9 2 Installation and Network Configuration ............ -
Page 5: Overview
Overview 1 Overview 1.1 Product Description The ZKSD3 series products are high-speed dome IP cameras with CCD sensors, which are integrated with multiple new technologies in mechanical, electronic and casting fields; they are high-performance integrative cameras with built-in zoom lens and high-end surveillance products combining the platform and digital decoder design, which represent new generation technologies. - Page 6 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Analog video signal output interface Functions of the system 1/4" Sony high-performance CCD used for sharp images; Driven by precision motor, featuring sensitive response and steady operation;...
-
Page 7: Technical Parameters
Overview Support ratio zoom function; rotation speed can be automatically adjusted according to the zoom multiple. Performance Hi3512 high-performance multimedia processor, supporting H.264 Main Profile video coding The highest resolution of images is to D1 (704 * 576) resolution ... - Page 8 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Secondary Code Stream: 352x288, 176x144 optional Video Frame Rate 1~25 frames optional Functional Interfaces Audio Interface 1 Mic input and 1 linear output (optional) Alarm Input 1 alarm input (normally opened or normally closed) (optional)
-
Page 9: Product Appearance
Overview Working Environment AC 24V, ≥2A Input Power POE Ethernet power supply: comply with 802.3af regulation (optional) 30W (without heater) Maximum Power Consumption 40W (with heater) -40~+55 °C Working Temperature Working Humidity 10%~85%RH Level of Protection IP66 Installation Mode Wall-mounted / Pending mounted net weight 4.5KG 1.4 Product Appearance... -
Page 10: Connecting Terminal
User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 1.5 Connecting Terminal ( 8 ) ( 7 ) ( 6 ) ( 5 ) ( 4 ) ( 3 ) ( 2 ) ( 1 ) Power Interface: used for connecting the power adapter. The voltage of series products is 24V AC and the current is not lower than 2A. - Page 11 Overview Alarm output Alarm input 1. The schematic diagram of alarm input connection is as follows: alarm input terminals alarm (IN,GND) switch input device power supply of alarm input device Schematic Diagram of Alarm Input (Normally Opened) Connection alarm input terminals alarm (IN,GND)
- Page 12 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 alarm alarm output terminals switch output (COM,NO) device power supply of alarm output device Schematic Diagram of Alarm Output (Normally Opened) Connection Notice: The connection with normally opened alarm output (e.g. normally opened lock) is performed as shown in the following schematic diagram.
-
Page 13: Basic Procedure
Overview locally to connect with the image display device and adjust the camera angle to the appropriate monitoring area according to the scene in the video. 1.6 Basic Procedure Unpack and check whether any component is missing; Connect the camera to computer by means of patch cable; If your computer IP is in a network section different from camera IP, please set it to the same network section as camera IP, such as, 192.168.1.87. -
Page 14: Installation And Network Configuration
User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 2 Installation and Network Configuration 2.1 Hardware Installation Installation Notices: Read through the guide for installation prior to installation. Check whether any component is missing against the packing list, if yes, please contact your supplier. - Page 15 Installation and Network Configuration Please use the power (voltage 24V AC and rating current no lower than 2A) provided by the factory for the cameras. Much higher or lower voltage and direct current power may cause the camera failure. Use the standard power cord when the power supply is too far away from the camera, and consider the voltage drop caused by long distance.
- Page 16 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Pay attention to provide lightning protection if the camera is mounted outdoor. Do not touch the camera during lightning. Use the camera in the working conditions: Ambient temperature: -20 ℃ ~ +55 ℃; ambient relative humidity: 10% ~ 95%RH.
- Page 17 Installation and Network Configuration circuit of the control circuit board or even the damage of the camera. The correct and wrong wiring modes are shown as follows: correct wiring wrong wiring Installation Diagram Wall Mounted Mode: Stick the installation template onto the wall, and drill holes according to the markings on the template.
-
Page 18: Network Connection
User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Fix the bracket in wall by 4 screws. steel M8 expansion bolt Note: The method of Pendant Mounting is the same as Wall Mounting. Paper template for pendant mounting Pendant mounting 2.2 Network Connection... - Page 19 Installation and Network Configuration Connect the power supply of the device. During normal connection, if it is a 10M network, the orange lamp is always on; if it is a 100M network, the green lamp is also on. The physical connection with network is completed after the lamp shining.
-
Page 20: Accessing Device
User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 3 Accessing device There are 4 methods can be used to access the device: WEB Browser, RTSP Media Player, Mobile Device and Video Surveillance Software (ZKiVision client software). 3.1 Using WEB Browser Open a browser, type in the dynamic domain name or IP address of the device (e.g. -
Page 21: Using Rtsp Media Player
Accessing device Note: When accessing the device via browser for the first time, it is necessary to download the control. More details about how to use browser for video surveillance, please refer to WEB Server User Manual in the supplied CD. 3.2 Using RTSP Media Player Download and install a media player supporting RTSP protocol, e.g. - Page 22 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Type in the network URL in the form of rtsp://<IP address>:<RTSP port>/<stream code>. Click “Play” and the media player will play the real-time video of the device.
-
Page 23: Using Mobile Phone
Accessing device Note: 1) The default RTSP port of device is 554. If it must be modified, please refer to WEB Server User Manual in the supplied CD. 2) If it is necessary to learn about how to use RTSP media player for video surveillance, please refer to WEB Server User Manual. - Page 24 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 Choose “Device List” and click “Add” to add devices, type in the user name, password, domain name and port of the device, click “Save” to complete it.
-
Page 25: Using Video Surveillance Software
Accessing device Choose “Live View” on the initial interface, click the cell and click again to select the device to play its live video. Note: 1) The operating system of mobile device must be Android or iOS or BlackBerry. 2) As the internet service is required for watching video, please consult with your internet service provider for specific charges. - Page 26 User’s Manual for ZKSD3 Series PTZ Dome IP Camera V1.7 monitoring can be started. If needed to learn about how to use the video surveillance software, refer to ZKiVision Client Software User Manual in the CD.
-
Page 27: Extended Functions
Extended Functions 4 Extended Functions The mini PTZ dome IP camera supports a maximum of 255 presets, among which presets 90 to 130 and preset 255 are used for special functions. 95 (invoke preset 95): Enter the high speed dome menu 91 (invoke preset 91): Enter the camera menu (if camera supports this feature) 128 (invoke preset 98): Invoke limit scanning 125 (configure preset 125): The auto horizontal scanning mode...