Download Print this page

ZKaccess ZKMD470 Installation Manual

Mini dome ipc

Advertisement

Available languages

Available languages

Quick Links

Mini Dome IPC Installation Guide
Version: 1.0
Attention
► Do not connect cables when power is on!
Do not connect cables when power is on!
► Network cable quality will influence the communication distance. Please use repeater when
exceeding network communication distance.
► Camera working environment: Temperature -20 ℃ ~ +55 ℃, humidity 10% ~ 95%RH. When
use it outside, please prepare suitable protection cover.
Please use repeater when exceeding 80m
Note: Please pay attention to above notices, otherwise the device can not work normally and
even get damaged seriously.
Chapter 1: Diagram for IP camera video surveillance
Mini common IP camera is designed specifically for indoor use. The built-in audio capture device
(microphone) ensures the function of sound acquisition. Embedded Web Sever allows user real-time
monitoring by means of computer based on TCP/IP network.
Date: 2011.10
► Please use DC 12V, currency no less than 1A.
DC12V/1A
1
Note: Please refer to user manual for details concerning cable interface.
Chapter 2: How to install IP camera
① Affix the paper template to ceiling or wall, and drill holes according to the circles in paper template.
② Use screwdriver to take off 2 fixed screws and put the lower cover off.
③ Fix the cameras by 2 screws first.
④ Adjust the lens angle to suitable surveillance area till image can be seen clearly.
TCP/IP
PC
2

Advertisement

loading

Summary of Contents for ZKaccess ZKMD470

  • Page 1  Note: Please refer to user manual for details concerning cable interface. Mini Dome IPC Installation Guide Version: 1.0 Date: 2011.10 Attention ► Do not connect cables when power is on! ► Please use DC 12V, currency no less than 1A. TCP/IP DC12V/1A Chapter 2: How to install IP camera...
  • Page 2 ⑤ Install the under-cover and fix it by 2 screws. Picture 1 Picture 2 5. After input the user name and password (default user name “admin” and password “admin”), below activeX controls will show in the screen. This is a prerequisite activeX and controls for this application, ④...
  • Page 3 Guia de instalación de la cámara IP mini domo Versión: 1.0 Fecha: 2011.10 TCP/IP Notas ►No se conectan cables con eléctricidad. ►Se usa por favor 12V DC, fuente de 1A de alimentación por lo menos. Nota: Consulte el detalle de terminal 1.5 del manual de usuario de CD-ROM adjuntado. DC12V/1A II.
  • Page 4 ④ Se ajusta el angulo de la lente hasta el arrea adecuado del control y vigilancia, se ajusta el enfoque 4. En la barra de direcciones del navegador internet entra la dirección IP de la cámara (por defecto es hasta que la imagen es nitida. “192.168.1.88”), al hacer clic en enter aparece la siguiente ventana de la pantalla mostrada en la figura I.