Jeep 2014 Wrangler User Manual page 66

ELECTRONICS
Menu
• Press the MENU hard-key to access the System Setup menu and the My Files
menu.
• Press the MENU hard-key in an active mode (SAT, CD, AUX, etc.) to change mode
specific settings.
Equalizer, Balance And Fade
Audio Control Menu
• Press the MENU hard-key on the right
side of the radio. Then press the "Au-
dio Control" soft-key to get to the audio
control menu.
• Use either the arrow soft-keys or the
cross-hair on the screen to change Bal-
ance and Fade. The "Center" soft-key
resets the settings.
• Touch the "Equalizer" soft-key and use either the arrow soft-keys or the sliders on
the screen to adjust BASS, MID, and/or TREBLE.
Display Settings
• Press the MENU hard-key and touch
the "Display Settings" soft-key to ac-
cess the Display Settings menu.
• Select the "Daytime Colors" soft-key
to switch to manual daytime mode and
to adjust the brightness of the display
using daytime colors.
• Select the "Nighttime Colors" soft-key
to switch to manual nighttime mode and to adjust the brightness of the display
using nighttime colors.
• Select the "Auto Color Mode" soft-key to switch to automatic daytime/nighttime
mode and to control the brightness of the display using the dimmer switch of the
vehicle.
• Touch the "EXIT" soft-key to save your settings.
64