Cadillac CTS Owner's Manual page 69

Hide thumbs Also See for CTS:
Table of Contents

Advertisement

3-16
Seats and Restraints
4. To make the lap part tight, pull
up on the shoulder belt.
To unlatch the belt, push the button
on the buckle. The belt should
return to its stowed position.
Before a door is closed, be sure the
safety belt is out of the way. If a
door is slammed against a safety
belt, damage can occur to both the
safety belt and the vehicle.
Shoulder Belt Height Adjuster
The vehicle has a shoulder belt
height adjuster for the driver and
right front passenger seating
positions.
Adjust the height so the shoulder
portion of the belt is on the shoulder
and not falling off it. The belt should
be close to, but not contacting, the
neck. Improper shoulder belt height
adjustment could reduce the
effectiveness of the safety belt in a
crash. See How to Wear Safety
Belts Properly on page 3-14.
Press the release button and move
the height adjuster to the desired
position. The adjuster can be moved
up by pushing the slide/trim up.
After the adjuster is set to the
desired position, try to move it down
without pushing the release button
to make sure it has locked into
position.
Safety Belt Pretensioners
This vehicle has safety belt
pretensioners for front outboard
occupants. Although the safety belt
pretensioners cannot be seen, they
are part of the safety belt assembly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents