Replacing The Door Gasket; Replacing The Light Bulb - Lec BC6097K User Manual

Replacing the Door Gasket

Pull the gasket out from
the door and replace it
with a new one.
Make sure the new
gasket seals against the
cabinet and there are no
air gaps.
You may use a hot air
gun (hair drier) to mould
the new gasket on to the
door if required.
Note: Replacement door gaskets are available from our Spares department
We advise that you clean the door gasket frequently to prevent a build up of beer

Replacing the Light Bulb

In order to replace the light bulb, you should:
1. Turn off the power supply and remove the plug from the socket.
2. Remove the light cover, which is made from flexible polycarbonate. To remove it,
starting at one end, gently free it from the bottom flange towards the rear of the
cabinet and then pull it downwards.
3. The light bulb is rotated ¼ turn to align the connector pins and then moved
carefully to free it from its sockets.
4. Replace the bulb with an equivalent 8W T5 bulb (single door models) or 14W T5
bulb (double and triple door models) and rotate it ¼ turn to lock it in position.
5. Locate the cover into the recess of the light housing and feed its' edge into place
in the bottom flange.
6. Plug in and restart the appliance and check light is working. (If not, unplug and
follow steps 4 and 5 again)
7. Turn off the power supply and remove the plug from the socket.
8. Remove the light cover, which is made from flexible polycarbonate. To remove it,
starting at one end, gently free it from the bottom flange towards the rear of the
cabinet and then pull it downwards.
Note: Replacement light bulbs are available from our Spares department
and sugar liquids
www.lec-commercial.co.uk 17