Securing The Doona Car Seat On The Doona Isofix Base - doona ISOFIX Base User Manual

20
0 6 / Installing and
removing of the Doona
Car Seat from the
Doona ISOFIX Base.
6.1. Securing the Doona Car Seat
on the Doona ISOFIX Base
After securing the Doona ISOFIX Base in your vehicle (See chapter
5 for instructions), you may now easily connect and remove the
Doona Car Seat from your vehicle. To do so, follow the steps below:
IMPOTRANT! Before installing the Doona car seat on the Doona ISOFIX
Base, make sure that the Doona release button (#3) is pressed in,
and the Doona color indicator (#4) is red. It should turn green only
when the Doona car seat was correctly installed on the Doona
ISOFIX Base.
In case the Doona color indicator (#4) is Green before installing the
Doona Car Seat, You should press down the small top button, and
while it is pressed down push the entire Doona release button (#3)
forward until it clicks in place and the Doona color indicator (#4)
turns red.
THE N EX T G EN ER AT I O N C A R SEA T / IS O FI X B A S E