Advertisement
Quick Links
Advertisement
Related Manuals for Wintec LP-MINI 46
Summary of Contents for Wintec LP-MINI 46
- Page 1 LP-MINI 46 User’s Manual...
-
Page 2: Safety Warning
Thank you for purchasing Wintec products. Based on the innovative technology in this ever-changing environment, we have been developed many wireless products that have attract more consumers’ attentions. We sincerely appreciate your interest for our products, and we suggest you read the instruction carefully. Your comment will be highly valued. -
Page 3: Table Of Contents
Packaged Model Contents When you receive your radio package, inspect the shipping carton for any signs of damage. Next, remove and check the contents of the packing case to be sure that all items ordered have been included. Contents of the packing case may be different from those listed if optional accessories were ordered. -
Page 4: Radio Overview
Radio Overview Antenna (SMA socket) Down button LED Indicator PTT button (Push to talk) Power Switch / Volume Control P2 function button Data socket (mini USB) P1 backlight button External Mic. Jack Speaker LCD display Mic. Up button Lanyard hole Set button Battery Latch... - Page 5 1. Antenna Provide attached SMA rubber flex antenna or (SMA socket) other 50Ω impedance antenna. Note: It may cause the damage to your radio if the antenna is connected inappropriately. 2. LED Indicator LED Indicator turns on red when transmitting. LED Indicator turns on green when receiving signal.
- Page 6 ◆Press [▲] to select the channel / CTCSS 7.Up button [▲] upward. ◆Press and hold [▲] to enable the scanning function and perform the channels upward. ◆In function menu, press [▲] to switch the selections upward. ◆Press [SET] to enter CTCSS adjustment. 8.
-
Page 7: Lcd Icons
LCD Icons Symbol Item Description Shows the signal strength. Four bars indicate Signal Strength the strongest signal. ◆The icon appears and stays on when the CTCSS Tone CTCSS tone is not set with; the icon Indicator disappears on the screen if the channel is set Speaker with CTCSS tone. -
Page 8: Installation Of Accessories
Installation of Accessories To Attach the Battery Fit the extensions at the bottom of the battery into the slots at the bottom of the radio’s body. Press the top part of the battery towards the radio until a click is heard. - Page 9 To Attach the Belt Clip Align the grooves of the belt clip with the battery. Slide the belt clip downwards until a click is heard. To Remove the Belt Clip Lift belt clip tab up. Slide the belt clip upwards to remove it.
- Page 10 Battery Charging Place the radio with battery attached or the spare battery alone in the rapid charger for charging. Following is LED instruction. Steady Green: Charger has successfully powered up. Steady Red: Battery is in rapid charge mode. Blinking Green: Battery has completed rapid charge. Blinking Red: Battery is unchargeable or not making proper contact.
-
Page 11: Operation Guide
Operation Guide Before operating the radio, make sure the attached battery is fully charged. When the battery level is very low, you need to recharge it before you can continue to use your radio (The radio has a battery voltage icon to show the battery status on LCD screen). Power On / Off Rotate the power switch / volume control knob clockwise to switch power ON. - Page 12 Channel Scan Press and hold [ ] [ ] to start scanning for the channel. When scanning is in operation, press [SET] to end the scanning. CTCSS Tone Adjustment Press [SET] to switch the function of channel adjustment and CTCSS Tone adjustment.
-
Page 13: Function Menu
Function Menu Press and hold P2 button to enter the function menu. Press [ ] [ ] to select the function settings. Menu Factory Description Option Items Default RF Squelch Level 3 Level 0~ Level 7 SOUND Sound Effect ON / OFF Auto-power-off OFF / 30 / 60 / 120 mins OFF / 30 / 60 / 90 / 180 /... - Page 14 TOT: Transmission Timeout There are OFF / 30 / 60 / 90 / 180 / 360 secs in selection. While one of them is selected, push and hold PTT if continuous talk before the time out 10 sec. and radio will send out a beep warning sound. At the same time, LCD screen shows “TOT”...
-
Page 15: Optional Accessories
To order other accessories, please contact your local dealer. Wintec endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the above specifications and design are subject to change without notice due to continuous development. - Page 16 PK MINI47-E VER.1...
Need help?
Do you have a question about the LP-MINI 46 and is the answer not in the manual?
Questions and answers