Advertisement
SYSTEM VARIATIONS
2 CHANNELS 2 WAY SYSTEM FRONT/REAR NON FADE
2CH/4CH
Front/HP
2
CH
4
CH
2
CH
4
CH
2 CHANNELS 3 WAY
2CH/4CH
Front/HP
2
CH
4
CH
2
CH
4
CH
Rear/Mid
HP/BP
Front Output
Rear Output
Sub Output
Rear/Mid
HP/BP
Front Output
Rear Output
Sub Output
- 5 -
TROUBLE SHOOTING GUIDE
Front tweeters
1. NOT WORKING
Check all fuses.
Check all power (positive,remote) wire connections.
Rear woofers
Check that ground wire is properly connected.
2. LED POWER ON INDICATOR NOT GOING ON:
Same as sign 1 remedy.
3. SOUND DISTORTION AT LOW VOLUME LEVEL
Sub-woofers
Output level not set correctly.
4. LEVEL OF SOUND IS LOW:
Check the RCA patch cords for loose or misconnected cables.
5. A WHINING SOUND CAN BE HEARD THROUGH THE SPEAKERS AT LOW
VOLUME LEVEL WITH RUNNING ENGINE:
Check the power wire (red) with good connection directly to the battery
and ground point must make good contact with chassis ground.
SPECIFICATIONS & FEATURES
Crossover Frequencies
Front tweeters
-Front output
-Rear/Mid output
Rear woofers
-Sub output
Crossover slope:
Sub-woofers
Output level:
Subwoofer boost:
Input level/:
Input impedance:
Frequency response:
T.H.D.:
Channels separation:
Signal to noise ratio:
Dimensions:
Highpass:
x1 variable between 60Hz and 600Hz
x10 variable between 600Hz and 6KHz
Lowpass:
x1 variable between 60Hz and 600Hz
x10 variable between 600Hz and 6KHz
Highpass:
variable between 50Hz and 500Hz
Lowpass:
variable between 40Hz and 150Hz
12 dB per octave
6 dB gain, up to 8 VRMS
variable, 0-6dB @ 45Hz
620mV to 7V
10K ohms
10Hz to 30KHz + 1dB
0.005%
> 75 dB
> 100 dB
130(w) x 187 (L) x 41 (H) mm
- 6 -
Advertisement
