Advertisement
CARTRIDGE INSTALLATION & REPLACEMENT
1.
Turn off cold
water supply.
2.
Open faucet
(Faucet Model only).
Remove closure rod.
3.
Helpful Hint #2
If you have difficulty separating
the cover from the bowl, water
pressure can help. Follow steps
1 & 2, but close the faucet. With
a pan ready to catch water from
the unit, slowly turn on the water
supply to the unit. Once the unit
begins to separate, turn off the
water supply.
Special Note
Special Note
Special Note
Special Note
Special Note
To change swing direction of the faucet
handle, move the pin under the handle.
Stainless steel pin
4.
old cartridge
and insert
new one.
Pull unit apart.
6.
supply with faucet open.
Run water through new
cartridge for 2- 3 minutes
to remove loose particles.
Pin adjustable to
right or left side
Remove
5.
Reassemble
unit. Replace
closure rod.
Turn on cold water
close-up of moveable pin
* * * * *
When
replacing
cartridge
apply light
coat of
petroleum
jelly on
o-rings.
Advertisement
