Advertisement
RV/MARINE MOUNTING BRACKET INSTALLATION
1.
Screw wall plate to wall
with the 2 screws supplied
with retainer latch up.
retainer latch
Note: Be sure to leave enough
clearance when mounting wall
plate for placing and removing
unit with hoses attached.
cover
retainer
latch
3.
Slide the nature pure
into the ring bracket until
the retainer latches over
the cover. The taper lock fit
will hold the unit securely.
4.
Push the retainer latch away
from cover - rotate and lift
the unit from the bracket.
2.
Slide the ring
bracket down onto the
wall plate until it snaps
into place as shown.
cover
retainer
latch
To remove the unit -
Advertisement
