Gas & Wood 2200 Owner's Manual page 13

9. Cooktop is installed at the factory, Shipping screw must be removed before installation of
faceplates. (Figure 2.8)
10. Install faceplate (Figure 2.7) with four HF47 (#10 x 3/8" sheet metal) screws supplied, ensuring
the ¼" rod on the air control plate extension protrudes through the slot in the RH faceplate &
moves freely horizontally.
11. Add the HM95 air control knob (Figure 2.10).
Figure 2.8
Figure 2.10
Figure 2.9
/12