Advertisement
MAINTENANCE
*Disconnect electricity connection before maintenance
and cleaning process.
*Aluminum cassette filter holds the dust and the oil in the
air.
*Metal filter should be washed once in a month with hot
and soaped water or, if possible, at dishwasher (60C).
*Take off aluminum cassette filter pressing on springy
latches on end point. After cleaning, do not replace before
it dries.
*Outer surface of the cooker hood should be wiped with a
wet cloth that is wetted with water or alcohol.
*Please avoid contact of electronic parts with water or
similar materials.
*Using Inox cleaning and maintenance products available
in the market will help your product to perform longer.
Warning: Aluminum filters may be washed in the
dishwasher. Color of aluminum filters may change after
several washings. This is normal and it is not necessary to
change the filters.
Efficient Ventilation
In order to ensure correct ventilation, keep your kitchen windows closed.
IMPORTANT NOTE
Please pay attention when the product is operated at the same time with a product which
operates using air and fuel (for instance; heater, water heater etc. which operates using gas,
diesel fuel, coal or wood), since cooker hood may affect burning negatively as it directs the air
out.
This warning is not valid for usage without chimney.
Picture 7
Washable Aluminum
Cassette Filter
Picture 6
-8-
Standard Accessories
Plastic Outlet (Picture 2)
Plastic outlet mounted to air outlet of the cooker hood
Place of the Product:
After installation of your product, distance between
range hood and electrical hob should be at least 65
cm and gas hobs at least 75cm. Figure 2
Installation, taking off your product from its package:
*Check if there is any deformation on your product.
*Transportation damages and failures should immediately be reported to the transportation
responsible.
*If you notice any damage please report to the seller.
*Do not allow children to play with packing material!!!
ASSEMBLY UNDER CLOSET
4 Holes are bored on the wooden plate under yhe closet by using assembly pattern.
A chimney outlet hole larger 130 mm is bored on this wooden plate by using assembly pattern.
INSATLLATION TO THE CUPBOARD
Use the 3,5 x 45 screws which are in the mounting set
to fix the cooker hood to the cupboard. Be sure that
when you draw out the slide set that the front panel
doesnt gad to the cupboard door. (Figure 3-3a)
Picture 2
Min.65 cm
Min.75 cm
Figure 2
Figure 3a
-5-
Figure 3
Advertisement
