Download Print this page

Introduction Of Device - Davoline Telescopic Lux 1144 Instruction Manual

Davoline telescopic lux 1144 cooker hood

Advertisement

INTRODUCTION OF DEVICE

Touch control product
Picture 1
1144 - 60
1) Front panel
1
2) Comand panel
3)
Aluminum Cassette Oil Filter
2
4) Illumination
3
4
1144 - 90
Figure 1
-2-
3 Speed Digital Control
Cleaning Periods of Aluminum Filter
Filter should be cleaned when "C" signal appears on the Display or each 2-3 weeks (in
accordance with the usage frequency). After cleaning and replacing filters to their places,
button should be pressed for more than 3 seconds (when the product is off) in order to
remove the "C" signal. "E" signal will appear on Display and product will start working at normal
position. If you want to continue using your product without removing "C" signal, active speed will
appear for 1 second when you press
motor will continue operating.
NOTE: "C" signal will appear after you use the product for 60 hours.
5 Speed Digital Control
Cleaning Periods of the Aluminum Filters:
Filters should be cleaned when "
" signal appears on Display or (according to usage) each 2-3
weeks. In order to remove " " signal, after the filters are cleaned and replaced to their place, press
button more than 3 seconds (when the product is at off position). Letter "E" will appear on
Display and the product will operate as normal. If you would like to continue using the product
without deleting " " signal, when you press the
then " " signal will appear once more and the motor will continue operating.
NOTE: " " signal will appear after usage of the product for 60 hours.
In order to use the cooker hood efficiently;
*Pay attention to aluminum filters' cleaning periods and changing periods of carbon filters.
*Use the product at middle speed if high suction power is not necessary.
* In order to ensure that ventilation occurs correctly, windows of the kitchen should be kept closed.
M
CAPASITOR
LAMP
FUSE
FUSE
BROWN
BLUE
ELECTRONIC CIRCUIT
INPUT : 220 - 240 V AC / 50 Hz
1144
(3 SPD)
button, then "C" signal will appear once more and the
button active speed will appear for 1 second,
FUSE
LAMP
10
ELECTRONIC CIRCUIT (FOR 5 SPEED)
1144
(5 SPD)
-11-
BLACK
GREY
YELLOW
WHITE
M
BLUE
1~
RED
BROWN
BROWN
YELLOW/GREEN
BLUE
INPUT : 220 - 240 V AC / 50 Hz

Advertisement

loading