Important Safety Instructions; Safety Caution - Vesta Pro 600 VAC User Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS –This manual
contains important instructions for models
Vesta Pro 600/800VAC that should be
followed during installation and
maintenance of the UPS and batteries.
This UPS utilizes voltages that may be hazardous. Do not attempt to

disassemble the unit. The unit contains no user serviceable parts.
Only factory service personnel may perform repairs.
Internal battery voltage is 12Vdc. Sealed, lead-acid, 6 cells battery.

Connection to any other type of receptacle other than a two-pole,

three-wire grounding receptacle may result in s shock hazard as well
as violate local electrical codes.
In the event of an emergency, turn the power switch to the "off"

position – on and disconnect the power cord form the AC power
supply to properly disable the UPS
Do not allow any liquids or any foreign object to enter the UPS. Do

not place beverages or any other liquid-containing vessels on or near
the unit.
This unit intended for installation in a controlled environment

(temperature controlled, indoor area free of conductive contaminants).
Avoid installing the UPS in locations where there is standing or
running water, or excessive humidity.
Do not plug the UPS input into its own output.

Do not attach a power strip or surge suppressor to the UPS.

Do not attach non-computer-related items, such as medical

equipment, life-support equipment, microwave ovens, or vacuum
cleaners to UPS
To reduce the risk of overheating the UPS, do not cover the UPS'

cooling vents and avoid exposing the unit to direct sunlight or
installing the unit near heat emitting appliances such as space heaters
or furnaces.
Safety – CAUTION!