Honeywell HE360 Installation Kit page 6

HE360 HUMIDIFIER AND INSTALLATION KIT
FEED TUBE NOZZLE
WATER
DISTRIBUTION TRAY
HUMIDIFIER
PAD ASSEMBLY
THUMB
SCREW
7. Position the securing clips as shown in Fig. 4.
8. Make sure the humidifier housing is level, then position it in the opening so the
plastic tabs are in place on the lower sheet metal edge of the opening. Use pli-
ers, as necessary, to flatten cut edges. See Fig. 5.
9. Push in securing clips until completely seated.
10. Drill holes and install the three sheet metal screws on the top of the humidifier
housing. Secure the housing with the three remaining screws.
69-2631ES—01
Fig. 3. Disassembling humidifier.
CLIP
Fig. 4. Position securing clips.
6
HUMIDIFIER
HOUSING
COVER
ASSEMBLY
M12809
CLIP
M12813