Page 2
KODAK Video Monitor CFH-V15 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
KODAK Video Monitor CFH-V15 Regulatory Notices for USA This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
KODAK Video Monitor CFH-V15 Camera Mounting To mount the KODAK Video Monitor CFH-V15 to a wall, unscrew the base of the camera and remove the metal plate. With the included screws and anchors, fasten the mounting bracket onto the wall. Before mounting the camera, the camera should be plugged into the AC adapter.
Google Play store. 2. Connect to Power Remove the mounting plate from the bottom of the camera. Then, connect the KODAK Video Monitor CFH-V15 to the AC power adapter, and plug the power cord into the electrical outlet. Quick Start Guide 5...
Page 6
The KODAK Video Monitor CFH-V15 will rotate when the camera is ready for setup (this may take up to 2 minutes when the camera is first...
KODAK Video Monitor CFH-V15 3b. Connect Device to KODAK Video Monitor CFH- Android Before connecting to the camera, please turn on the Wi-Fi on your device as well as your personal Wi-Fi network. Then, go to your device Settings under the Wi-Fi settings, ...
KODAK Video Monitor CFH-V15 4a. Launch iSecurity+ App Once your device establishes its connection to the KODAK Video Monitor CFH-V15 (usually takes around 30 seconds), launch the iSecurity+ app. If you don’t see the pop-up prompt, please close the app and re-launch it.
Page 9
KODAK Video Monitor CFH-V15 4b. Setup Wizard Follow the instructions in the Camera Setup Wizard to complete installation. Quick Start Guide 9...
Page 10
KODAK Video Monitor CFH-V15 4d. Setup Complete Once you see the page below, the setup process has been completed. Restart iSecurity+ and please log in again. You can use your iOS or Android devices to access the camera anywhere in the world. Make sure...
Page 11
KODAK Video Monitor CFH-V15 5. Using iSecurity+ Please enter your username and password, created during the setup process, in the login window to access your KODAK Video Monitor CFH-V15. Quick Start Guide 11...
Page 12
KODAK Video Monitor CFH-V15 6a. iSecurity+ Features – Main Window Configure Camera Camera Status Friends’ Recorded Cameras Events Settings...
KODAK Video Monitor CFH-V15 6b. iSecurity+ Features – Camera Viewer Swipe directional controls to change the camera Pan & Tilt view. Audio Take a Mute Snapshot Record a Audio Video Clip Talk Back Quick Start Guide 13...
Page 14
KODAK Video Monitor CFH-V15 7. Electronic PTZ Function Zooming In - Touch the screen with two fingers together and slide outward at an angle, and the image will zoom in. Zooming Out - Touch the screen with two fingers apart and slide inwards at an...
KODAK Video Monitor CFH-V15 8. Audio Talkback 1. To use Audio Talkback, first press the Audio button to initiate sound to listen in. 2. Then, press and hold down the Audio Talkback button and speak into your device. Let go of the Audio Talkback button for the audio to transfer to the camera’s...
KODAK Video Monitor CFH-V15 Safety Information Do not point the camera directly at the sun, otherwise it will damage the image sensor. Keep the camera away from heat to avoid electric shock. Keep the camera away from rain and moisture.
KODAK Video Monitor CFH-V15 Troubleshooting LED Status Indicators During Wi-Fi Setup Mode Blinking green & orange: Setup mode on Orange: Setup mode initializing Light off: Setup mode off During Normal Operation Green: Connected to iSecurity+ Orange: Connected to local network...
KODAK Video Monitor CFH-V15 For More Information For support or to learn more about KODAK Connected Family Home products, please visit: www.connectedfamilyhome.com To get the latest software updates or to learn more about iSecurity+, please visit: www.isecurityplus.com...
Page 19
KODAK Video Monitor CFH-V15 Limited One Year Manufacturer Warranty Seedonk Inc. will repair or replace (at our discretion) your camera unit free of charge (except for shipping cost) for 12 months from the date of purchase, if unit is determined to be defective.
Need help?
Do you have a question about the CFH-V15 and is the answer not in the manual?
Questions and answers
Isecurity app not supported for my phone. What replaces it?