Adjusting Backup Camera Settings - Garmin nuvi 880 Quick Start Manual

Customizing the nOvi
• NOTE: You do not need to activate
the subscription included with your
FM traffic receiver (if it came with
one). The subscription activates
automatically after your niivi acquires
satellite signals while receiving traffic
signals from the service provider.
1. From the Menu page, touch
Tools>
Settings> Traffic.
2. For Non-North American units, touch
Subscriptions> Add.
For North
American units, touch
Add.
3. Write down the FM traffic receiver
unit 10.
4. Go to www.garmin.com/fmtraffic to
purchase a subscription and get a
25-character code.
5. Touch
Next
on the nuvi, enter the
code, and touch
Done.
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM traffic receivers, you must
obtain a new code for each receiver.
50
Adjusting Backup
Camera Settings
The nuvi supports NTSC and PAL
composite video input. Touch Tools>
Settings> Backup Camera.
Switch to Camera-select how the nuvi
switches to the backup camera when
your vehicle is in reverse.
• Auto-automatically switches to
backup camera mode when the nuvi
detects that your vehicle is in reverse.
• Prompt-prompts you to switch
to backup camera mode. When the
prompt appears, touch Yes to view
the backup camera.
• Never-select to not show the
backup camera. This option requires
you to select View Camera on the
Backup Camera page to view the
backup camera.
Video Format-select a video input.
Select Auto for the nuvi to automatically
nOvi 800 Series Owner's fvlanual