Record Setup; 1-1.1 Quality & Frame Rate Setup; Event Setup - GOLDEN STATE INSTRUMENT GS-16CH264 User Manual

Table 1-0.2 The operation of remote control under the setting menu
Item
Switch to different options under one item
Switch to different items
MENU Save setup and back to LIVE mode
ESC Back to Upper level of menu without saving
ENTER Enter the menu, or display virtual keyboard
PS. The initialization of new-installed HD is required before recording, please refer to " UTILITY
SETUP" for detail.

1-1 RECORD SETUP

Item Description
Select STOP to stop recording or OVERWRITE to reuse the
HDD when HDD is full
「Stop」 ： Stop Recording
HDD FULL
「Overwrite」 ： Start to overwrite that begin from the oldest data
of HDD, and continue to record.
OSD position X Setup OSD X axis
OSD position Y Set up OSD y axis
OSD position setup Set up OSD axis
Setup the video preservation period. Recorded video will be
Video Preservation
deleted automatically after expiry of preservation period.
Quality & Frame Rate Setup the quality and frame rate for each channel under normal
Setup
recording and event recording type.
Note：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
Description
5
1-1.1 Quality & Frame Rate Setup
Item
Normal setup/
Select recording mode

event setup

Select recording resolution: NTSC:360x240, 720x240, 720x480
Resolution
PAL:352X288,704X288,704X576
Record Type You can setup quality and FPS separately for record type.
No.
Check/uncheck the box enable/disable selected channel recording
Quality
Select quality: Below Basic/ Basic/ Normal/ High/ Highest
Select recording frame rate.
FPS
(The number of sheets in accordance with the actual models)
Auto Assign each channel with its maximum accessible fps
Note：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
1-2 EVENT SETUP
Item
Motion Setup Enter to set up motion detection
Sensor Setup
Enter to set up sensor detection
Description
Description
6