Table of Contents
Advertisement
Installation
❏ Installation Procedures (When not using Mounting Collar w)
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
7
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
t Round Head Screw (5 mmø x 6 mm)
u Round Head Screw (4 mmø x 3 mm)
y Flat-Head Screw (5 mmø x 6 mm)
Use the supplied Spacer i if mounting hole of your
car is shaped like below.
Mounting Hole
of a Bracket
(in section)
Bracket
t Round Head Screw
(5 mmø x 6 mm)
Existing Bracket (L) (Bracket originally attached to the car)
To Remove the Unit
q Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself.
w After removing the right and left clamp plates, pull the unit with both hands till it comes out.
q
8
CQ-VX220W
(continued)
Reuse the two round head screws removed from the transportation brackets.
4 pieces
i Spacer
o Double-Faced Adhesive Tape
Push here to
remove the
clamp plates.
2 pieces
4 pieces
i Spacer
o Double-Faced
w
When using these
mounting holes
t Round Head Screw
(5 mmø x 6 mm)
Existing Bracket (R)
Adhesive Tape
Advertisement
Table of Contents
