Setup - Seiki SM40UNP User Manual

OSD Menu Settings

SETUP

To set up H. Position, V. Position, Phase, Clock, Auto,
DisplayPort, Reset and Information.
SOURCE
H. Position
LANGUAGE
V. Position
Phase
OSD SETUP
Clock
SETUP
Auto
AUDIO
DisplayPort
Reset
PiP/PbP
Information
COLOR
PICTURE
: MENU
H. Position
V. Position
Phase
Clock
Auto
DisplayPort
Reset
Information
50
50
50
50
1.2
No
: DOWN : UP : EXIT
To adjust the horizontal position of the screen.
To adjust the vertical position of the screen.
To adjust delay time of phase in order to reduce the noise of picture.
To adjust clock frequency in order to get optimized horizontal size.
To auto adjust Horizontal Position, Vertical Position, Phase(Fine Tune) and Clock(H.Size) of the screen.
To set the Displayport version.
To recall factory settings for Video & Audio controls.
To display the information, regarding the current input signal coming from the graphic card in your computer.
Touch the to display the On Screen Display menu.
Touch the / to select SETUP.
Touch the again to enter the setup setting.
Touch / to select your desired setting and touch the
enter. Then use the / to adjust the setting.
Touch the to exit.
to
25
OSD Menu Settings