Download Print this page

Nitecore CR6 User Manual page 2

Advertisement

The All-Round Flashlight Expert
Instant High Mode
With the light turned off, press and hold the side control switch all the way
down then press the tail switch to go directly to turbo or high (main color)
mode. This feature will assist in directly switching to the highest modes of
output for emergency situations.
NOTE: When using two CR123 batteries, the light will automatically lower its
output after 20 minutes to prevent overheating and battery damage.
Strobe, Beacon and Signal Modes
With the light turned on, press and hold the left (white) switch all the way
down for more than 1 second to cycle through the following modes: strobe
mode -> location beacon -> SOS.
With the light turned on, press and hold the right switch (colored) all the way
down for more than 1 second to active police warning signal. Press the switch
again to turn this mode off.
NOTE: Among all special modes, only strobe mode can be saved.
Power Tips
1. With the light switched on, the power indicator on brightness adjustment
button will blink once every two seconds when power levels reach 50%.
2. With the light switched on, the power indicator on brightness adjustment
button will blink rapidly when power levels are low.
Changing Batteries
When the power indicator blinks rapidly this indicates the batteries need to be
replaced. Alternatively if the light becomes dim or unresponsive to adjustment
this also indicates batteries need to be replaced.
®
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE ® products are warranted for quality. DOA / defective products
can be exchanged for replacement through a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning
NITECORE ® products will be repaired free of charge for a period of 18
months from the date of purchase. After 18 months, a limited warranty
applies, covering the cost of labor and maintenance, but not the cost of
accessories or replacement parts. The warranty is nullified in all of the
following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE ® products and services, please
contact your national NITECORE ® distributor or send an email to
service@nitecore.com
The Nitecore official website shall prevail in case of any product data changes.
Please follow our facebook for more info: NITECORE Flashlights
SYSMAX Industry Co., Ltd.
TEL:
+86-20-83862000
FAX:
+86-20-83882723
E-mail:
info@nitecore.com
Web:
www.nitecore.com
Address
Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600

Advertisement

loading

This manual is also suitable for:

Cg6Cb6