Page 2
This equipment generates, uses and can radiate radio fre- Widex distributor for advice on how to quency energy and, if not installed and used in accordance with the instructions, dispose of your hearing aid.
Alarm ......... . 23 Caring for your RC4-1......25 ties (partners, healthcare workers and care-givers) Good advice .
Page 4
Your remote control is an accessory for your hearing Your remote control is a small computer that con- aid. You can easily operate your hearing aid without tains data for different hearing aid settings. It also the remote control; it is just an alternative way of contains a radio transmitter which sends messages operating your hearing aid.
1. Volume control. The [ ] and [ ] keys are used for Battery type – volume adjustment. The recommended battery type for your RC4-1 re- mote control is: 2. Program selection. The [ ], [ ] and [ ] keys are Lithium CR 2032 used for program selection.
Switching the RC4-1 on Inserting the batteries The RC4-1 remote control is switched on by press- ing the [ ] key. By default, the remote control auto- The plus ( ) sign on the batteries for your RC4-1 matically switches off after 30 seconds.
Page 7
When the hearing aid is switched on, you will hear a Explanation of the remote control screen symbols: speech message or a tone to confirm that the remote Program. The numbers after P show the select- control is active. ed program. You can choose between programs 1, 2 and 3 The hearing aid is now set to the same program and Volume (level).
Volume Adjusting the volume Adjusting the volume Each time you adjust the volume Press the [ ] key. The initial set- you will hear a beep tone. ting, P1 V9, should now be dis- played. Use the [ ] keys to –...
Mute With your RC4-1 remote control, you can choose from up to three listening programs. Together with You can also use your RC4-1 to mute your hearing your hearing care professional you should have es- aid completely. tablished which programs are of use to you. If your...
Page 10
A spoken message will indicate your program choice In these instructions, you and your hearing care pro- each time you switch to another program. If you fessional can make a note of the programs you have have chosen the tone indication setting instead of a chosen.
Page 11
Selecting a listening program Important: Please note that if you alternate between using your remote control and the controls on your Press the [ ] key. The initial set- hearing aid to adjust the volume and select listening ting, P1 V9, should now be dis- programs, the remote control will cancel any adjust- played.
Event log Alarm When the event log is enabled, Your RC4-1 remote control may be equipped with you can start a 1-minute logging an alarm if you have chosen this in consultation of the sound environment in the with your hearing care professional. You can set the hearing aid.
Caring for your RC4-1 A small bell appears in the display. If you With proper care, your RC4-1 remote control will want to change the alarm setting, press give you a long life of reliable service. Here are some ]. Then the bell disappears and you can...
In case of in- • The RC4-1 remote control is not certified for use gestion, contact your physician and the National in mines or other areas with explosive gases.
The following accessories are available: please follow the advice below: • Clip version of the battery cover If your RC4-1 does not work, it could be because: • Case for the remote control • Nothing happens when you press the keys. Flip •...
Page 16
The clip version has a built-in clip for fastening the RC4 to your belt or waistband, and an eye in which you can fasten the carrying strap if you want to carry the RC4 around your neck. Changing the battery cover If you want to replace the stan- dard battery cover with the clip version, you must also replace the...
Need help?
Do you have a question about the RC4-1 and is the answer not in the manual?
Questions and answers