Makro Detector Deephunter User Manual page 16

MODE 1: ADJUSTING GROUND BALANCE
5
Ra se the co l 40 cm above the ground. Now, keep ng the co l parallel to the
ground, press the reset button and lower the co l to 3 cm.
6
7
8
If the dev ce rece ves "-" e ects, ra se the co l 40 cm and press "-" key; f the e ect s
"+", press "+" key for a wh le and then press the RESET button and lower the co l to
the ground hold ng t at a d stance of 3 cm above the ground. Repeat th s process
unt l the e ect s completely removed (unt l the s gnal on dev ce d sappears).
40 cm
40 cm
Reset
If there s ground e ect on dev ce, th s e ect w ll
be seen on the "GROUND EFFECT" bars as shown
n the f gure. In th s case, the dev ce s ready for
search. S mply press the OK button to sw tch to
the Search sect on.
If there s ground mpact ng the dev ce, th s
e ect w ll be shown as "GROUND EFFECT" on the
bars as shown n the f gure. To remove th s e ect,
press "-" key for "-" e ects and "+" key for "+"
e ects. Repeat the steps 8-10 unt l th s e ect s
removed.
Reset
3 cm
3 cm
13