Mitsubishi Electric MAC-102CRC-E Mr. Slim Operating Instructions Manual page 7

AIR FLOW VELOCITY AND DIR
AIR FLOW velocity and direction can be se-
lected as required.
COOL
AUTO AUTO
ON/OFF TEMPERATURE
DOWN
FAN VANE
RESET
I
To change the AIR FLOW velocity,
press the
Each time the button is pressed, the fan speed is
changed in sequence:
•
Use the
•
If the operating sound of the air conditioner disturbs
your sleep, use the
F
I
To change the AIR FLOW blowing di-
rection vertically, press the
Each time the button is pressed, the angle of the
horizontal vane is changed in sequence:
(2) →
SWING OPERATION
UP
Use the swing operation for the air flow to reach all cor-
ners of the room.
Recommended horizontal
vane range
Use the AUTO position usually.
Use position (1) or
COOL mode when adjusting to
your requirements.
NOTE
I In the cooling operation, when the air conditioner is
operated with setting the horizontal vane to (4) or
(5) for 1 hour, the AIR FLOW direction is automati-
cally set to horizontal to prevent condensed water
from dropping.
I Adjust the vertical AIR FLOW direction using the re-
mote controller. If the horizontal vane is moved manu-
ally, it may cause trouble.
FAN
button.
(Low) →
(High) → AUTO
(High) notch to cool the room more.
(Low) notch.
(3) → (4) → (5) → (SWING) →AUTO
COOL
(2) in the
(Med.) →
VANE
button.
(1) →
1
2
3
4
5
4